cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
587
Views
0
Helpful
2
Replies

Wireless Surveying

BJcomms64
Level 1
Level 1

                   I intend to use an air-lap1131AG-E-K9 as a stand alone portable base station with airmagnet software on a laptop with a D link USB adapter for internal wireless surveys requested by a customer. My problem is that the base station has newly arrived and has the radios (2.4 & 5 Ghz)  disabled by default. I can get access to CLI using hyperlink but cannot see any way to simply enable transmission of radios. Any advice would be appreciated.

Barry

2 Replies 2

Scott Fella
Hall of Fame
Hall of Fame

Berry,

That ap is lightweight and if you are using it to survey, you need to convert that to ios. So you will need to download the iOS software from CCO and tftp the image to that AP.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Scott Fella
Hall of Fame
Hall of Fame

By the way this is the model you should of purchased. The one you have is a lap1131.

air-ap1131AG-E-K9

Here is a link

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Review Cisco Networking for a $25 gift card