04-28-2010 12:34 PM - edited 07-03-2021 06:46 PM
Hi all,
If I have wireless ip phone 7921 connected to access point.Access point is controlled by wireless access controller.
How RTP traffic moves?
wireless ip phone----->access point----->access controller----->access point------>wireless ip phone
or
wireless ip phone----->access point----->wireless ip phone
Any ideas?
BR,
Ahmed Kamal
04-29-2010 06:53 AM
Assuming the AP's are in local mode the traffic would go wireless ip phone----->access point----->access controller----->access point------>wireless ip phone
If they phones are in H-REAP mode and the WLAN is locally switched then it would be wireless ip phone----->access point----->wireless ip phone
04-29-2010 04:53 PM
Can you explain this please
"
If they phones are in H-REAP mode and the WLAN is locally switched then it would be wireless ip phone----->access point----->wireless ip phone"
BR,
Ahmed
04-30-2010 06:27 AM
This should explain everything
http://www.cisco.com/en/US/products/ps6087/products_tech_note09186a0080736123.shtml#topic1
05-04-2010 09:05 PM
To Dans point,
If you use HREAP local switching, your traffic generated on the HREAP ap dumps off on the ethernet and stays local to the office. Only control frames go across to the WLC. Make sense?
05-05-2010 02:08 AM
yes.
thx Gents.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide