cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
413
Views
0
Helpful
3
Replies

wism controller does not show url redirection spalash page

susim
Level 3
Level 3

Hi 

Wism controller does not show url redirection/splash page .

client takes the ip from the  dhcp server. when browsing its not going to the authentication page as usual

Thank you 

3 Replies 3

Scott Fella
Hall of Fame
Hall of Fame

Can you elaborate on your issue... really hard to follow.  To me, it seems like you want to use a guest splash page.  The client associates to the open guest ssid and get's an ip address.  Now the user has to open a browser to get the portal page correct?  This has nothing to do with the WLC, but the OS on the device.  Some devices can detect if no internet is present after authentication and obtaining an address.  This means the device will automatically open a browser to present the user with the splash page.  Other devices will require the user to open a browser to get the login screen.

Scott

-Scott
*** Please rate helpful posts ***

Thanks scott for your reply .

you are correct , i want to use a guest splash page . once the user connect ed the ssid and open a browser , the device was redirecting to the portal . But it suddenly stopped .  I did a 'shut' and 'no shut' on interface vlan and it worked !!. 

 

 

There is nothing you need to do on the WLC. My basic testing for this is using my iPhone or iPad which does open up the portal page once I join the SSID. My windows machines do not open automatically

Scott

-Scott
*** Please rate helpful posts ***
Review Cisco Networking for a $25 gift card