03-14-2018 10:14 AM - edited 07-05-2021 08:22 AM
Can the WLAN controller be connected to both two separate segmements on the network e.g LAN switch for access to the enterprise network and DMZ switch to separate guest internet access vlan from the LAN traffic
Solved! Go to Solution.
03-14-2018 01:25 PM
Hi
It is possible. I don't which model do you have but don't matter what, the wlc has more then one physical port and you can configure those ports independently.
But better yet, you can use logical segregation with port channel if physical segregation is not a must.
However, the port channel can be configured with only one Switch at a time.
Hope I did not confuse you.
-If I helped you somehow, please, rate it as useful.-
03-14-2018 01:25 PM
Hi
It is possible. I don't which model do you have but don't matter what, the wlc has more then one physical port and you can configure those ports independently.
But better yet, you can use logical segregation with port channel if physical segregation is not a must.
However, the port channel can be configured with only one Switch at a time.
Hope I did not confuse you.
-If I helped you somehow, please, rate it as useful.-
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide