I have a Cisco WLC 2504 with the default QoS profiles defined (Wireless Section > QoS > Profiles). I have a WLAN tied to the Bronze (background) QoS profile.
When I did a SPAN and Wireshark on my Cisco switch, I expected to see frames with the 802.1p tag with a value of 1 (as defined by the QoS profile), but the tag was still set at 0 (BE), the default. The QoS profile for Bronze is set to the 802.1p value of 1.
Does anyone know what might be the issue? I do not have Fastlane enabled.