WLAN QoS values are not shown on the wired interface

[istvan.kelemen1]

Hello,

I am trying to implement WLAN QoS. WLC 2504 8.2 is configured as shown below.

ICMP packets are marked with DSCP 18 however I don't see them on the switch interfaces.

Interfaces do trust in both DSCP/CoS.

What's wrong?

Thanks,

Istvan

[Rasika Nayanajith]

At what point you capture your traffic to see the DSCP value ?

WiFi clinet <--> AP <----> Switch <---> WLC <----> Wired Network

Keep in mind for upstream (client to wired network) traffic AVC mark up taking effect only at the WLC.

HTH

Rasika

[istvan.kelemen1]

Hi Rasika,

That's a good question.

I think I checked the interface between switch - wlc