03-02-2017 09:14 AM - edited 07-05-2021 06:38 AM
I have a WLC 5508 runing 8.2.141.0
Presently we have created one SSID and it assigned to four APS with different AP groups defined as per location.
We have created a guest WLAN and assigned its dynamic interface but the SSID is not seen/broadcasted
Please advise how to go about this as we need the guest WLAN to be seen from all APs
03-02-2017 10:42 AM
So the SSID is enabled and broadcast is defined, the AP's are in the correct AP group with the proper mapping. The AP's in FlexConnect mode? Is the guest tunneling back to the controller?
-Scott
*** Please rate helpful posts ***
03-02-2017 10:53 AM
Yes the SSID is enabled and broadcast is defined and the APs are in correct group but the APs are in local mode
03-06-2017 01:54 AM
Did you add the guest WLAN manually in all AP groups.
Regards
Dont forget to rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide