WLC 2500 in HO, Aironet1600 on branch with two internet line

[khaled alodat]

Hi,

Im new in cisco wireless and i'm looking to configure awlc2500 and 1600 access point on one of our branches.

In a branch I will install one Aironet 1600, we have two lines in the branch the first one is MPLS link and a normal ADSL router.

My plan is to configure the wlc to send configuration through th MPLS netwrok but i want the user to go to internet through the ADSL router

Is that somthing easy to do .

Thanks,

Khaled

[Rasika Nayanajith · Accepted solution]

Flex Connect with Split Tunneling is one solution I can think of. Here is a Ciscolive material discuss all branch wireless design options. This will definetely help you

http://d2zmdbbm9feqrf.cloudfront.net/2013/usa/pdf/BRKEWN-2016.pdf

Here is some reference how I have configured split-tunneling for a centrally switched wlan in my environment.

http://mrncciew.com/2013/09/09/split-tunneling-with-flexconnect/

HTH

Rasika

**** pls rate all useful responses ****

[khaled alodat]

The best way is to create a second vlan for the users, the vlan will be connected to the ADSL router , the AP port will be trunk native vlan (managment vlan), on the flex connect maping vlan (managment vlan ) and access vlan (adsl Vlan).

thank you.