Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, August 4, 2025 through Friday, August 15, 2025. Our colleagues Saikat Nandy and Parithosh Vema will be waiting to assist you ...
Forum Posts
Resolved! 2100 WLC help
Hi, i was tasked with moving two 2100 WLC from one switch to another. Before the move both switches saw 11 APs. supposedly they were configured if one 2100 fails the other takes over. Now i have moved both to a new switch and both are pingable and th...
I have a guest anchor configuration with the following specifications. I have one 5508 DMZ controller located in a centrally located data center in once state with a connection to our ISP for internet connectivity. It sits in a DMZ with rules restric...
Hello, I have a problem with a root ap, the switch that was connected is broken so now I want to make it work as a mesh AP, it connects through mesh to the WLC but is all the time registering and de-registering to the WLC, if I change from ROOTAP opt...
Hi Guys,I have 2* cisco 5508 WLC in HA mode . Both are running IOS 7.5.102.0 . Everything is working perfectly fine.I need to Creat 3 differnet SSID and Creat 3 different login Pages for them . Each user from respective SSID will get specified login ...
Resolved! How to add AIR-CAP1552E-x-K9 to WLC 2504
Hi all,I just purchase 3 AIR-CAP1552E-x-K9 for outdoor wifi purpuse i want to add them in wirless controller, i dont want to use them as mesh AP. I just want to configure them so that client can get wifi access and these all APs manage by Wireless C...
Hi forum,Is there a free tool I can use to survey the site that we are going to install wireless network?can "firewall" - concrete wall 1 feet thick blocking the RF signal?thanks much,paul
Hi Guys,I need Cisco Access point with antenna 12 dbi
Hi guys,Do you know if there will be any issues if we use a mixture of Access Points with CleanAir enabled and some that do not at a site?I have 1142s that do not support this and 3602 that does, connected to Flex7500.Thanks.
Hello..I am currious of the effect of injected Amplification, and how a product like the LUXUL Shockwave 1 Watt amplifier would effect the Antenna Gain and Beamwidth.http://www.wirelessnetworkproducts.com/download/hd25036_specs.pdfIt's my understandi...
Resolved! MSE platform status check up not working
Hi!!I have a problem when using the MSE.I have it installed on a Virtual Machine on a Windows 2003 Server.When i log in and do the:etc/init.d/msed statusit loads a lil bit and then showsStarting MSE Platform, Waiting to check the Status.like 10 times...
We are having issues with VoIP, using Microsoft Lync, over wireless. We are experiencing static, jitter, dead air, and dropped words during calls. We have a Cisco wireless infrastructure consisting of a 5508 controller and 2602 access points. We'r...
Hi, I recently bought 15 new AP Aironet 3500 (AIR-CAP3502I-A-K9) and connect to 3 different Cisco Catalyst 2960S. All of these get powered at boot with 15.4 Watt but after the boot process, they all drop to 14.5W and the LED blinking all color to say...
HiI had 1 end of life WLC 4402 controller. Can it support AIR-CAP1602E-S-K9 access point? If cannot, what is the supported access points for WLC 4402.Thanks
Hi,In one of our factory, there are handheld scanning devices which work over wireless to move data over to end servers.The setup has two-5508 WLC in HA mode, about few 1500 series & 3500 series AP's.handheld device is assigned an ip address & connec...
Hi,I have a 4402 WLC with 44 Cisco Aironet 1240 AP's in lightweight mode and my wireless networks WIFI-GUEST, WIFI-PROV and WIFI-CORP01 works propertly. Recently we installed an Aironet 1600 Series in standalone mode and we can connect to WIFI-GUEST...
