WLC 2504 and HP Procurve

[tahequivoice]

Having an issue with connecting the WLC to an HP

Vlan 1 data

Vlan 2 voice

Vlan 10 WLC

What are the settings on the HP to connect to the WLC?

[Stephen Rodriguez]

To an extent it depends on the config of the management interface.  If you have the management set to be 0, then:

Tag 1

Tag 2

no tag 10.

If you have all interfaces tagged then,

notag 1

tag 2

tag 10.

HTH,

Steve

----------------------------------------------------------------------------------------------------------

Please remember to rate helpful posts or to mark the question as answered so that it can be found later.

[tahequivoice]

The Management is set to untagged. So the first settings group is what the switch is set to.  I will pass this one, thanks.