09-06-2019 01:35 AM - edited 07-05-2021 10:57 AM
Hello All Communitty,
I have a Question Regarding WLC 3504.
I just bought a basic unit WAP371 and WLC 3504 just for testing and i cannot see AP joins the WLC.
Does this basic Unit (WAP371) supported by WLC 3504 ? if not than which Access Points model can be supported by WLC3504?
Any suggestions or Recommendations would be highly appreciatable .
Thanks
Usman Ali
Solved! Go to Solution.
09-06-2019 01:42 AM - edited 09-06-2019 01:44 AM
NO, 3540 WLC dont support WAP371
check compatibility matrix: https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
Regards
Dont forget to rate helpful posts
09-06-2019 01:42 AM - edited 09-06-2019 01:44 AM
NO, 3540 WLC dont support WAP371
check compatibility matrix: https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
Regards
Dont forget to rate helpful posts
09-06-2019 01:47 AM
Hi Sandeep thanks for the Reply and which Access Points are supported by wlc 3504 ?
09-06-2019 02:11 AM
@usmanalichouhaan wrote:
which Access Points are supported by wlc 3504 ?
That will depend entire on what firmware the WLC runs on.
09-06-2019 02:33 AM
As LEO mentioned, it depends on the software version you are using on WLC.
Go through to the compatibiliy matrix, To check which AP support which version:
compatibility matrix: https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
Regards
Dont forget to rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide