cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4234
Views
1
Helpful
8
Replies

WLC 4402

homiePM!e5Kcc?hQ#bG
Community Member

I need to upgrade the software on WLC 4402 to 7.0 or higher for use with Cisco 3502i APs.. However, I can't seem find the download link anywhere.. Any help would be awesome! 

8 Replies 8

skern
Frequent Visitor
Frequent Visitor

Please try this link, which will require you to be logged into with your Cisco account first;

https://software.cisco.com/download/home/279911193/type/280926587/release/7.0.220.0

 

Leo Laohoo
Hall of Fame
Hall of Fame

Download 7.0.252.0.

When I open the link, the download does not work.. I've already submitted a Cisco support request, but haven't heard anything yet. 

 

Screen Shot 2019-05-29 at 9.04.11 PM.png 

That looks like an internal error with the download site. Will likely need to wait for Cisco support to provide a solution, as you're doing everything else right. 

Please try a different browser, that can sometimes help.

Bogdanroibu
Community Member

I am trying to download the software update for the same wlc and i get the same message, i tried a different browser other than safari and i get the same message that gohrenberg is getting...even though this is years later

 

 - @Bogdanroibu    These controllers are no longer supported , so you can no longer download software for them,

  M.



-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

@Bogdanroibu those controllers were End of Support nearly 10 years ago so Cisco has long since removed all software from the Cisco download site.
https://www.cisco.com/c/en/us/obsolete/wireless/cisco-4400-series-wireless-lan-controllers.html

Cisco 4400 Series Wireless LAN Controllers - Retirement Notification

The Cisco 4400 Series Wireless LAN Controllers has been retired and is no longer supported.

You can view a listing of available Wireless LAN Controller offerings that best meet your specific needs

------------------------------
Please click Helpful if this post helped you and Accept as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's,   Best Practices for 9800 WLC's   and   Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
Field Notice: FN74383 APs Running 17.12.4/5/6/6a May Run Out of Flash Space Preventing Upgrades
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390
Review Cisco Networking for a $25 gift card