cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
778
Views
5
Helpful
2
Replies
davinci
Beginner

WLC 5508 HA redundancy management IP addresses

Is it possible to use same IP addresses for redundancy management IP address pair and the regular management IP address pair on WLCs?

1 ACCEPTED SOLUTION

Accepted Solutions
Rasika Nayanajith
VIP Mentor

Management & Redundancy-management should be on same subnet. Each unit need to have unique redundancy-management IP address & management IP address is shared between units.

 

Something like below

 

(WLC) >show interface summary
management LAG 1000 x.x.0.200
redundancy-management LAG 1000 x.x.0.201
redundancy-port - untagged 169.254.0.201

 

(WLC-Standby) >show interface summary
management LAG 1000 x.x.0.200
redundancy-management LAG 1000 x.x.0.202
redundancy-port - untagged 169.254.0.202

 

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

2 REPLIES 2
Rasika Nayanajith
VIP Mentor

Management & Redundancy-management should be on same subnet. Each unit need to have unique redundancy-management IP address & management IP address is shared between units.

 

Something like below

 

(WLC) >show interface summary
management LAG 1000 x.x.0.200
redundancy-management LAG 1000 x.x.0.201
redundancy-port - untagged 169.254.0.201

 

(WLC-Standby) >show interface summary
management LAG 1000 x.x.0.200
redundancy-management LAG 1000 x.x.0.202
redundancy-port - untagged 169.254.0.202

 

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

awesome, thanks for the help.

Content for Community-Ad