cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5756
Views
0
Helpful
2
Replies

WLC 5508 Problem

sudeesh12
Level 1
Level 1

Hi All,

I have a WLC 5508, its PS1 and PS2 are OFF state, SYS is blinking amber and ALM is continues amber,

Its port s are not coming UP and I am not able to access the Controller, All ports are physically down and

in console nothing is showing when I connect through the console cable.

If anyone knows the issue please advise,

thanks

1 Accepted Solution

Accepted Solutions

Amjad Abdullah
VIP Alumni
VIP Alumni

in the guide it says if SYS is blining amber and ALM is continuous amber then it is internal voltage error.

Internal Voltage Error:

SYS blinks amber.

ALM is continuous amber.

Reference: http://www.cisco.com/en/US/docs/wireless/controller/5500/install/guide/ctrl5500.html#wp35245

If your power source is OK then it seems the internal power is faulty and you need RMA.

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"

View solution in original post

2 Replies 2

Amjad Abdullah
VIP Alumni
VIP Alumni

in the guide it says if SYS is blining amber and ALM is continuous amber then it is internal voltage error.

Internal Voltage Error:

SYS blinks amber.

ALM is continuous amber.

Reference: http://www.cisco.com/en/US/docs/wireless/controller/5500/install/guide/ctrl5500.html#wp35245

If your power source is OK then it seems the internal power is faulty and you need RMA.

HTH

Amjad

Rating useful replies is more useful than saying "Thank you"

Hi,

Thanks for your reply,

As you said it seems internal power is faulty..

thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: