wlc 9800 config with ise

[shlomoi]

Hi ,
We recently installed a new 9800 controller. I am trying to connect the controller to ISE in 2 ways.
1. For portable terminal with MAC authentication.
2. For 802.1X users

Is there a guide?

thanks

[MHM Cisco World · Accepted solution]

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/213919-configure-802-1x-authentication-on-catal.html

MHM

[MHM Cisco World · Accepted solution]

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/213920-central-web-authentication-cwa-on-cata.html 

for portal which is called CWA 

MHM

[shlomoi]

Thanks, but how do I check that the controller is properly connected to ISE?

[Flavio Miranda · Accepted solution]

@shlomoi 

You can follow this guide.

Actually,  you just need to add the ISE as Radius server for MAB and 802.1x.  There will be more to do when creating the SSIDs, of course. But, related to adding ISE to WLC, this guide below cover pretty much everything.

https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/214490-configure-radius-and-tacacs-for-gui-and.html