cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3691
Views
15
Helpful
2
Replies

WLC and AP 2602 Join Failed

probopurwo
Level 1
Level 1

Hi all,

anyone can help me for this log ?

Translatiuokng "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)  o ooi po iopo

*Mar  1 00:00:57.527: %CAPWAP-5-DHCP_OPTION_43: Controller address 172.16.250.252 obtained through DHCP

*Mar  1 00:00:57.527: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.

*Mar  1 00:01:06.527: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER

*Mar  1 00:01:06.527: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC_TASPEN_01'running version 7.0.116.0 is rejected.

*Mar  1 00:01:06.527: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Mar  1 00:01:06.527: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Mar  1 00:01:06.527: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Mar  1 00:01:06.527: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.250.252

*Mar  1 00:01:16.527: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC_TASPEN_01'running version 7.0.116.0 is rejected.

*Mar  1 00:01:16.527: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Mar  1 00:01:16.527: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Mar  1 00:01:16.527: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Mar  1 00:01:16.527: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.250.252

*Mar  1 00:01:26.527: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC_TASPEN_01'running version 7.0.116.0 is rejected.

*Mar  1 00:01:26.527: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Mar  1 00:01:26.527: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Mar  1 00:01:26.527: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Mar  1 00:01:26.527: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.250.252

*Mar  1 00:01:26.771: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C3560X-24P (70ca.9be7.5c17)

*Mar  1 00:01:36.527: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC_TASPEN_01'running version 7.0.116.0 is rejected.

*Mar  1 00:01:36.527: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Mar  1 00:01:36.527: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Mar  1 00:01:36.527: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Mar  1 00:01:36.527: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.250.252

*Mar  1 00:01:46.527: %CAPWAP-3-ERRORLOG: Discovery response from MWAR 'WLC_TASPEN_01'running version 7.0.116.0 is rejected.

*Mar  1 00:01:46.527: %CAPWAP-3-ERRORLOG: Failed to decode discovery response.

*Mar  1 00:01:46.527: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 2 state 2.

*Mar  1 00:01:46.527: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller

*Mar  1 00:01:46.527: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 172.16.250.252

Not in Bound state.

*Mar  1 00:02:01.527: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.

Nedd your advice guys, Thanks ...

2 Replies 2

stefan.angerer
Level 1
Level 1

WLC Code 7.0.116.0 does not support the 2600 series APs, you need 7.3+

regards

Stefan

Thanks stefan ...

i'll try first .. thanks you

Review Cisco Networking for a $25 gift card