12-30-2009 12:35 PM - edited 07-03-2021 06:23 PM
How to block off a client from access point if sending too many requests on a WLC 4400.
12-30-2009 02:10 PM
Monitor-->clients (right hand side)---> click on the blue box next to the problem client and press disable
enjoy!
04-09-2013 01:36 PM
Hello,
Using this link you can configure the peer to peer blocking of clients:
http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_wlan.html#wp1161858
or you can use this method:
Monitor-->clients (right hand side)---> click on the blue box next to the problem client and press disable.
04-09-2013 02:42 PM
Or you can try CLI.
Command: config exclusionlist add AA:BB:CC:DD:EE:FF "Comments"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide