08-25-2012 08:34 AM - edited 07-03-2021 10:34 PM
Hello guys,
I recently bought a Cisco 5508 WLC with SWC5500LPE-K9-70 and a Cisco 1262 AP with AIR-OPT60-DHCP vender class identifier .How can I check wether the SWC5500LPE-K9-70 is included on the 5508 wlc and AIR-OPT60-DHCP on the 1262 ap?
08-25-2012 08:37 AM
Option 60 is what you configure on the dhcp and it really isn't required. That part# you have is without the DTLS license.... is that what you want.
If a customer chooses SWC5500K9-60, SWC5500K9-70 or SWC5500K9-72, DTLS Data Encryption is enabled by default. When a customer orders the 5500 and chooses either SWC5500LPE-K9-70 or SWC5500LPE-K9-72 in the Optional Licenses TAB, data DTLS Encryption is disabled.
08-25-2012 09:05 AM
Thanks Scott,
My client wants to see if SWC5500LPE-K9-70 license is included or not on the controller.
08-25-2012 09:09 AM
Look at table 5 for the license part #
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps10315/data_sheet_c78-521631.html
08-25-2012 09:35 AM
hi scott
the part no. is L-LIC-CT5508-50A but my question is how can i show the clinet from the controller this licence is included on the device or not? is there any show command to use from the controller CLI?
08-25-2012 11:19 AM
You can do a show license all or on the GUI main page shows the number of APs supported.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide