WLC Design

[dyunanda]

Hi, 

Could you please advise us which design best for routing, security and best practice ? DHCP server and ISE server location ?

Noted : Switch L3 is not our scope ( manage by other party ). VRF is configured by other party.

Option 1 

Option 2 

[Leo Laohoo]

Get a reputable systems integrator -- Both designs already contain rookie mistakes.

[Rasika Nayanajith]

Refer below Cisco validated design guide, if you want detailed guidance on some of the best practices when designing enterprise LAN & WLAN with Cisco products

https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-campus-lan-wlan-design-guide.html 

HTH
Rasika
*** Pls rate all useful responses ***

[dyunanda]

Thanks you for feedback. 

Could you advise only for WLC design (location or position ) ? because we only add 2 WLC ( HA ) and connected to other office ( Access point ) through VRF (other party). this is only requirement from time being . 

we know this design far from best practice, but we only have those equipment in planning. 

Regards 

Dedi Yunanda