WLC- dynamic Vlan assignment with Radius

[davidkares]

Hello, we would like to use this feature in our company and because of that I am now testing it. But I found one problem.

I created one testing SSID and two Vlans on WLC. On ACS I use an IETF atributes (064,065,081) for my account and I am changing Vlan ID (081) during testing.

It works with LEAP but when I use PEAP-GTC (which we use commonly in our company) the ip address is not assigned properly (ip which was assigned before remains).

Could you please help me?

[wong34539]

There is good document which explains how to configure Dynamic VLAN Assignment with RADIUS Server and Wireless LAN Controller. This will help you. You will find the document at http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml