06-18-2007 08:36 AM - edited 07-03-2021 02:13 PM
Hi All, I am testing a Cisco 2000 Series Wireless Controller with an eye on the WISM. I would like to know if any one out there has been successful at being able to throw troubled users into a limited access vlan for self remediation and isolation through a WLC. The limitation seems to be in order to place someone in a different vlan one must create an additional SSID to associate with the limited access vlan that is not good as we cannot force users to associte with an addition SSID. Anybody find a way to create two vlans which are associated with ONE SSID?
Regards,
Brian
06-21-2007 04:01 PM
The WLC will have no idea which vlan to use in this scenario. You can do this through a clean access setup with the WLC.
http://cisco.com/en/US/partner/products/ps6128/prod_technical_reference09186a0080540637.html
06-22-2007 04:19 AM
Hi,
Another solution would be,
(Posture Validation + Dynamic VLAN assignment) using ACS
Regards,
Prem
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide