cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4825
Views
0
Helpful
2
Replies

wlc license backup

Nub65
Level 2
Level 2

Hello,

I am trying to backup current license on wlc but I could not find what format I should use.

For example, if my tftp server IP address is 192.168.1.1 what format will the filename be?

tftp://192.168.1.1/licensebkp. - ?

1 Accepted Solution

Accepted Solutions

Hi Nub,

 

Extension is not required, Simple save the license file. Example : tftp://10.10.10.10/path/licensebackup.

 

If you want to install the same back use the file name in same format, Example: tftp://10.10.10.10/path/licensebackup.

 

Just make sure that dot after file name before saving the license in WLC and installing as per the example's I mentioned above.

 

Cisco WLC licensing Reference

Regards,
Sathiyanarayanan Ravindran

Please rate the post and accept as solution, if my response satisfied your question:)

View solution in original post

2 Replies 2

Hi Nub,

 

Extension is not required, Simple save the license file. Example : tftp://10.10.10.10/path/licensebackup.

 

If you want to install the same back use the file name in same format, Example: tftp://10.10.10.10/path/licensebackup.

 

Just make sure that dot after file name before saving the license in WLC and installing as per the example's I mentioned above.

 

Cisco WLC licensing Reference

Regards,
Sathiyanarayanan Ravindran

Please rate the post and accept as solution, if my response satisfied your question:)

Thanks mate

Review Cisco Networking for a $25 gift card