Hey Community! I'm excited to share something we've been working on that I think will really resonate with many of you managing wireless networks today. We just released the Cisco State of Wireless Report 2026, based on insights from over 6,000 wirel...
Forum Posts
Hi All, I've query I've 5508 WLC, which is having IOS 8.2.151.0, i want to upgrade the license on the WLC. Is it mandatory to reboot the WLC after license upgrade, as IOS is 8.2.151.0.
Hi Community! I'running SW version 8.5.140.0 on a Wism2 HA installation and encountered a problem in GUI today while removing a realm from the list under RADIUS Authentication Servers > Edit then following link Realm List. The error message I get ...
Hi, We have newly deployed Cisco prime infrastructure in our environment. Upon adding the controller to Cisco prime, we are receiving many alerts under "Rogue AP" category. Message:Rogue AP 'ec:9b:c3:8f:3a:e8' with SSID 'AndroidAP' is detected by AP ...
Hello. We use some devices wich are able to transmit uncompressed audio. The protocol is Dante by Audinate.The protocol can send data via unicast and multicast, if more devices are feed with the same stream. The multicast mode uses the Site Local Sco...
Dear Concern, I want to know about the usb port of Cisco AIR AP 1832l. Is it only a console port or it has any other purpose. TIA RegardsAhasun
Resolved! AP Tag Issue
Dear Community,I am trying to apply an AP Tag to an AP but the dashboard will not let me save it. I am going to Wireless-->Access Points and then clicking on the AP. IN the AP settings I am going to Tags and clicking on the edit icon. When I type the...
Resolved! Cisco rftool WiFi Planner
Has anyone used the Cisco rftool for a real project?https://rftool.cisco.com/It seems ok from playing with it, and is 1/10 of the cost of things like Ekahau Site Survey Pro. It only supports Cisco APs (including Meraki) but that is not a problem for ...
Our facility uses Cisco Aironet 1532E access points paired up with AIR-ANT2588P3M-N directional antennas. The question I have is, "how do you determine the polarization configuration of the antenna?" The antenna has 3 N-Type connectors, labeled Ante...
I have the most recent version of system software on this: c1140-k9w7-xx.153-3.JD16 However the setup guides I find for this mention things like Express Setup page and this simply doesn't exist when accessing this device through a webpage and the cl...
Resolved! How to check the blocked clients list
Hi,We have blocked some of clients using below option in Meraki, but we can't see any option for checking the list of clients are blocked. Can it possible to help any of one related to this. Advance ThanksNagesh
Resolved! Trap Logs Question
(a0:e0:af:57:2d:e0) Device ID: 0x41f3, Type: WiFi Invalid Channel[31], Severity: 0, Channels: 64, Cluster ID: 2e:42:20:02:15:1b, Previous Cluster ID: 2e:42:20:02:15:1b, Event: Set Not sure if I should be concerned of this event
Hello, I'm taking care of a Wireless implementation project on a new Warehouse (not currently built). Its size will be around 22000 square meters. The max height of the WH ceiling will be 12 meters. There will be 28 schelves/aisles. I'll make a simul...
Resolved! probleme AP joind to controller
Hello i have AP 1815i convertir to cisco moblity express with 8.8.100 and i have 3 other AP with 8.3.111 so controller moblity express don't see AP in ther interface web so message errer show in access point is : Controller rejected image do...
Is there a way to draw an obstacle on a Prime map and specify how tall it is? The situation is a building with a large outdoor walk-in cooler behind it. We are putting in outdoor antennas. I want to show how this cooler is blocking signal for antenna...
Good Afternoon everyone, So my colleague and i are trying to create two different networks in the same WLC, one corporate and one guest.We already thought doing by these methods and where trying to get second opinions on how to do it: - VLANS - We ha...
