cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
682
Views
0
Helpful
3
Replies
allenelson
Beginner

WLC serving multiple sites

Is there a way to stop the broadcasting of certain SSID's on certain access points? The customer has a WLC deployed at their main location, with a few APs hanging off of it at a remote. It would be nice if the remote location only broadcasted the networks it can support locally. Thanks!

2 ACCEPTED SOLUTIONS

Accepted Solutions
Scott Fella
Hall of Fame Guru

You need to define and use AP Groups. This allows you to specify what APs will have what ssids.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

View solution in original post

Amjad Abdullah
Engager

You need to use ap groups.

Here is a config example: www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

HTH

Amjad

Sent from Cisco Technical Support iPad App

Rating useful replies is more useful than saying "Thank you"

View solution in original post

3 REPLIES 3
Scott Fella
Hall of Fame Guru

You need to define and use AP Groups. This allows you to specify what APs will have what ssids.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

View solution in original post

Amjad Abdullah
Engager

You need to use ap groups.

Here is a config example: www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

HTH

Amjad

Sent from Cisco Technical Support iPad App

Rating useful replies is more useful than saying "Thank you"

View solution in original post

allenelson
Beginner

Thank you very much fellas, that worked perfectly.

Content for Community-Ad