WLC serving multiple sites

[allenelson]

Is there a way to stop the broadcasting of certain SSID's on certain access points? The customer has a WLC deployed at their main location, with a few APs hanging off of it at a remote. It would be nice if the remote location only broadcasted the networks it can support locally. Thanks!

[Scott Fella · Accepted solution]

You need to define and use AP Groups. This allows you to specify what APs will have what ssids.

Sent from Cisco Technical Support iPhone App

[Amjad Abdullah · Accepted solution]

You need to use ap groups.

Here is a config example: www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml

HTH

Amjad

Sent from Cisco Technical Support iPad App

[allenelson]

Thank you very much fellas, that worked perfectly.