cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1065
Views
0
Helpful
1
Replies

WLC5520 webauth timeout

startx001
Level 4
Level 4

Hi all ,

 

I have WLC 5520 , webauth / portal configured , and some test internal users on wlan guest .

After some time users timeout from session , and must enter username/password again .  I think 5 min like on this document 

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70users.html

Can this be turned off ?  IOS  8.1.122 

 

 

KR

VZ

 

 

 

 

1 Reply 1

mohanak
Cisco Employee
Cisco Employee

Configuring a Session Timeout (GUI)

Configurable session timeout range is:http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_01001010.html#d50702e76a1635
  • 300-86400 for 802.1x.
  • 0-65535 for all other security types.

Note


If you configure session timeout as 0, it means disabling session-timeout, in case of open system, and 86400 seconds for all other system types.

Note


When a 802.1x WLAN session timeout value is modified, the associated clients pmk-cache does not change to reflect the new session time out value.
Review Cisco Networking for a $25 gift card