Hi
Can I install ASR1000-6TGE line card in ASR1013 which has the following IOS-XE
asr1000rp2-adventerprisek9.03.08.00.S.153-1.S.bin
I also need to check if the firmware versions of R0 & R1 are compatible with it.
=======================================================================
show platform
Chassis type: ASR1013
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ASR1000-SIP40 ok 2y4w
0/0 SPA-4XOC48POS/RPR ok 2y4w
0/1 SPA-5X1GE-V2 ok 2y4w
0/2 SPA-8X1GE-V2 ok 10w2d
0/3 SPA-8X1GE-V2 ok 1y50w
R0 ASR1000-RP2 ok, active 2y4w
R1 ASR1000-RP2 ok, standby 2y4w
F0 ASR1000-ESP40 ok, active 2y4w
F1 ASR1000-ESP40 ok, standby 2y4w
P0 ASR1013/06-PWR-DC ok 2y4w
P1 ASR1013/06-PWR-DC ok 2y4w
P2 ASR1013/06-PWR-DC ok 2y4w
P3 ASR1013/06-PWR-DC ok 2y4w
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 00200800 15.0(1r)S
R0 10021901 15.3(1r)S
R1 10021901 15.3(1r)S
F0 1003190E 15.0(1r)S
F1 1003190E 15.0(1r)S
========================================================================
show hw-programmable all
Hw-programmable versions
Slot CPLD version FPGA version
-----------------------------------------------------------
R0 10021901 10072001
R1 10021901 10072001
F0 1003190E 10072001
F1 1003190E 10072001
0 00020008 N/A
