Hi,
I try to make an upgrade of an ISM FPD and generates an error that is:
FPD upgrade started.
FPD upgrade in progress on some hardware, reload/configuration change
on those is not recommended as it might cause HW programming failure
and result in RMA of the hardware.
Starting the upgrade/download of following FPD:
=========== ==== ======= ======= =========== =========
Current Upg/Dng
Location Type Subtype Upg/Dng Version Version
=========== ==== ======= ======= =========== =========
0/4/CPU0 lc cbc upg 18.5 18.6
------------------------------------------------------
FPD upgrade sent to location node0_4_CPU0
FPD upgrade completed for location node0_4_CPU0
% Failed to upgrade 1 FPD for A9K-ISM-100 on location 0/4/CPU0
which could be the problem?
