Hello,
How can i scale up bridge-domain from 2048 to 8192.
As per the link (http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-1/lxvpn/configuration/guide/lesc41/lesc41p2mps.html) ASR9000 series routers can scale up to 8192 bridge-domains.
However my ASR9k shows the l2vpn capability to be only around 2048. How can i configure 8192 bridge-domain
RP/0/RSP0/CPU0:ci-asr9k#show l2vpn capability
Tue Feb 10 14:11:36.797 EST
Capability mode: mixed-mode
L2vpn all-capable: N
System capability:
VPLS Max MAC addresses: 32000
VPLS Max bridge-domains: 2048
VPLS Max attachment circuits: 32768
VPLS Max pseudowires: 32768
RSI bit size: 13
Per-AC drop counters supported: Y
VPLS Preferred path allowed: Y
VPLS Preferred path fallback enable allowed: Y
VPLS Preferred path fallback disable allowed: Y
MAC withdrawal allowed: Y
Max attachment circuits per bridge-domain: 16384
VPLS Max virtual forwarding interfaces: 2048
VPLS Max virtual forwarding interfaces per bridge-domain: 1
VPLS Max pseudowires per bridge-domain: 512
VPLS Max pseudowires per virtual forwarding interface: 512
VPWS PW redundancy supported: Y
VPLS Access PW supported: Y
Bundle AC supported: Y
Security config supported: Y
DHCP snooping supported: Y
VPLS Static MAC filter supported: Y
VPLS MAC configs on bridge port supported: Y
VPLS Flooding config on bridge port supported: Y
Flood unknown unicast disable supported: Y
IGMP snooping supported: Y
MMRP flood optimization supported: Y
MMRP flood optimization max multicast address entries: 8192
MMRP flood optimization max PW participants: 262144
VPLS MAC Aging Default Timer Value: 300
VPLS MAC Aging Min Timer Value: 300
VPLS MAC Aging Max Timer Value: 30000
VPWS Max attachment circuits: 32768
VPWS Max pseudowires: 32768
VPWS Preferred path fallback enable allowed: Y
VPWS Preferred path fallback disable allowed: Y
-Ramdas
