hello experts,
I am wonder why my new ASR 1004 can not use any VPN command, such as 'crypto xxx xxx'
I have bought the FW license and received the paper license with no PAK.
and I can not use any license related command, like 'show license' or 'license xxx'
Could you please give me some advice for this problem, thanks in advance.
Yu.
tl-router#license ?
% Unrecognized command
tl-router(config)#license ?
% Unrecognized command
tl-router#show license ?
% Unrecognized command
tl-router#show ver
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISE-M), Version 15.2(2)S, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Mon 26-Mar-12 15:15 by mcpre
IOS XE Version: 03.06.00.S
Cisco IOS-XE software, Copyright (c) 2005-2012 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
tl-router uptime is 16 hours, 35 minutes
Uptime for this control processor is 16 hours, 38 minutes
System returned to ROM by reload
System image file is "bootflash:/asr1000rp1-adventerprise.03.06.00.S.152-2.S.bin"
Last reload reason: Reload Command
cisco ASR1004 (RP1) processor with 1698577K/6147K bytes of memory.
Processor board ID FOXxxxxxxxx
8 Gigabit Ethernet interfaces
6 Serial interfaces
1 Channelized STM-1 port
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
937983K bytes of eUSB flash at bootflash:.
39004543K bytes of SATA hard disk at harddisk:.
Configuration register is 0x2102
