cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 
cancel
2259
Views
2
Helpful
18
Replies

ACI leaf doesn't send dhcp discover

config
Level 1
Level 1

Hi team,

I can't to add my first leaf to the apic.  When i enter the tcpdump commad for the kpm_inb interface , i get nothing.

(none)# tcpdump -ni kpm_inb port 67 or 68
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on kpm_inb, link-type EN10MB (Ethernet), capture size 262144 bytes
^C
0 packets captured
0 packets received by filter
0 packets dropped by kernel

When i check the errors on the switch using moquery -c faultInfo command, i get the following error "F0341: fltDhcpClientIfIfOperStFailed" . I have already tried rebooting  the switch, but that didn't help.

 

Could you help me to find the reason?

 

@cisco ACI

18 Replies 18

@Robert Burns thanks for your help.

brocklesner7800
Level 1
Level 1

Just here, to read

Robert Burns
Cisco Employee
Cisco Employee

Can you also confirm that no other devices are connected to the Leaf other than the APIC(s) and/or Spines.

Robert

Yes, the other devices aren't connected to the Leaf

Review Cisco Networking for a $25 gift card

Save 25% on Day-2 Operations Add-On License