01-20-2020 12:06 AM
Hi all,
Can anyone help me out with configuring Cisco out of band switch in case your not able to control/manage the Cisco apic environment.
We would like to use a Cisco 3560 switch which is connected to one of the leafe's.
Any help would be appreciated!
01-20-2020 12:43 AM
here is the config guide for IN and OUTof band mgmt
01-20-2020 01:33 AM
Hi @monasir ,
Your configuration is pretty straight-forward. I have a similar configuration on a 3750 switch
My OOB subnet is 172.16.11.0/24, and the default gateway is a 2950 Router with IP of 172.16.11.1. I am using VLAN 1000 for my OOB VLAN.
The switch has the following (relevant) configuration:
interface GigabitEthernet1/0/41 description =>APIC1 switchport access vlan 1000 switchport trunk encapsulation dot1q switchport mode access ! interface GigabitEthernet1/0/42 description =>APIC2 switchport access vlan 1000 switchport trunk encapsulation dot1q switchport mode access ! interface GigabitEthernet1/0/43 description =>APIC3 switchport access vlan 1000 switchport trunk encapsulation dot1q switchport mode access ! interface GigabitEthernet1/0/44 description =>Spine201- switchport access vlan 1000 switchport mode access ! interface GigabitEthernet1/0/45 description =>Spine202 switchport access vlan 1000 switchport mode access ! interface GigabitEthernet1/0/46 description =>Leaf101 switchport access vlan 1000 switchport mode access ! interface GigabitEthernet1/0/47 description =>Leaf102 switchport access vlan 1000 switchport mode access ! interface Vlan1000 ip address 172.16.11.37 255.255.255.0 ! ip default-gateway 172.16.11.1 ip http server ip http secure-server ! ip route 0.0.0.0 0.0.0.0 172.16.11.1
I hope this helps
Don't forget to mark answers as correct if it solves your problem. This helps others find the correct answer if they search for the same problem
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide