Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- Technology and Support
- Data Center and Cloud
- Application Centric Infrastructure
- New APIC-M4 (C225 M6 chassis) not showing a VIC / adapter 1 in CIMC
Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
977
Views
0
Helpful
8
Replies
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-02-2024 12:49 PM
Hello all,
I have a new APIC-M4 (C225-M6 chassis) that I'm installing, and I wanted to upgrade the software on it to the new 6.0.5(M) version, but before doing that I went to upgrade the CIMC version to the recommended version for 6.0.5(M). Per the Cisco Application Policy Infrastructure Controller Release Notes, Release 6.0(5) - Cisco , the CIMC version depends on whether you have a certain SFP connector on your Adapter 1:
4.3.2.230207 CIMC HUU ISO (recommended*) for UCS C220/C240 M5 (APIC-L3/M3) and UCS C225 M6 (APIC-L4/M4)
...
...
...
* We do not recommend this CIMC release if you have the SFP-10G-T-X connector type on the Cisco APIC data link ports (eth2-1 and eth2-2). To see which connector type you have, enter commands as shown in the following example:
C220-WMP2704001H /chassis # scope adapter 1
C220-WMP2704001H /chassis/adapter # show ext-eth-if detail
So I went into my APIC-M4 CIMC to run those commands, and I discovered I don't have an adapter 1 :
apic2-cimc# scope chassis
apic2-cimc /chassis #
apic2-cimc /chassis # scope adapter 1
Error: Managed object does not exist, use show command to list valid targets
apic2-cimc /chassis #
apic2-cimc /chassis #
apic2-cimc /chassis # show ad
adapter adapter-ie-status
apic2-cimc /chassis # show adapter
apic2-cimc /chassis #
Is this a problem to not show an "adapter 1" in my chassis ?
- Also, because I don't have an adapter 1 , I can't access the VIC in the CIMC GUI > Networking to make sure LLDP is disabled on the VIC per the Cisco APIC M4/L4 Server Installation and Service Guide - Installing the Server [Cisco Application Policy Infrastructure Controller (APIC)] - Cisco , the NIC Mode and NIC Redundancy Settings section.
0xD2A6762E
Solved! Go to Solution.
Labels:
- Labels:
-
APIC
1 Accepted Solution
Accepted Solutions
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-03-2024 08:42 AM
Pro-tip - Next time drop the output into a txt file and attach that, so it doesn't blow out the thread
So your adapter is the Intel 10/25G SFP adapter, so you can ignore the HUU warning and proceed. Let the Host Update Utility update everything it can.
UCSC-P-I8D25GFRobert
8 Replies 8
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-02-2024 02:32 PM
Provide the output of:
scope chassis
inventory-all
Robert
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-03-2024 07:18 AM
Thanks Robert, please see output below:
apic2-cimc#
apic2-cimc# scope chassis
apic2-cimc /chassis #
apic2-cimc /chassis #
apic2-cimc /chassis # inventory-all
sysProductName: APIC-SERVER-M4
sysProductID: APIC-SERVER-M4
sysSerialNum: WZP272700PZ
localTime: Thu Mar 28 21:03:36 2024 UTC +0000 (Local)
...
CPU
id: 1
SocketDesignation: CPU1
ProcessorManufacturer: Advanced Micro Devices, Inc.
ProcessorFamily: Zen
ThreadCount: 32
SerialNumber: Unknown
ProcessorVersion: AMD EPYC 7313P 16-Core Processor
CurrentSpeed: 3000
CoreCount: 16
CoreEnabled: 16
Status: Enabled
MaxSpeed: 3725
Signature: Family 19h, Model 1, Stepping 1
id: 2
SocketDesignation: CPU2
ProcessorManufacturer: N/A
ProcessorFamily: N/A
ThreadCount: N/A
SerialNumber: N/A
ProcessorVersion: N/A
CurrentSpeed: N/A
CoreCount: N/A
CoreEnabled: N/A
Status: Unpopulated
MaxSpeed: N/A
Signature: N/A
...
Memory
DIMMList:
id: 1
Name: DIMM_P1_A1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 2
Name: DIMM_P1_A2
Capacity: 16384 MB
Speed: 3200
MemoryType: DDR4
MemoryTypeDetail: Synchronous Registered (Buffered)
BankLocator: NODE 0 CHANNEL 0 DIMM 1
Manufacturer: 0xAD00
SerialNumber: E057CCD1
AssetTag: Not Specified
PartNumber: HMA82GR7DJR4N-XN
Visibility: Yes
Operability: Operable
DataWidth: 64 bits
id: 3
Name: DIMM_P1_B1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 4
Name: DIMM_P1_B2
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 5
Name: DIMM_P1_C1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 6
Name: DIMM_P1_C2
Capacity: 16384 MB
Speed: 3200
MemoryType: DDR4
MemoryTypeDetail: Synchronous Registered (Buffered)
BankLocator: NODE 0 CHANNEL 2 DIMM 1
Manufacturer: 0xAD00
SerialNumber: E057CC6C
AssetTag: Not Specified
PartNumber: HMA82GR7DJR4N-XN
Visibility: Yes
Operability: Operable
DataWidth: 64 bits
id: 7
Name: DIMM_P1_D1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 8
Name: DIMM_P1_D2
Capacity: 16384 MB
Speed: 3200
MemoryType: DDR4
MemoryTypeDetail: Synchronous Registered (Buffered)
BankLocator: NODE 0 CHANNEL 3 DIMM 1
Manufacturer: 0xAD00
SerialNumber: E057CCD2
AssetTag: Not Specified
PartNumber: HMA82GR7DJR4N-XN
Visibility: Yes
Operability: Operable
DataWidth: 64 bits
id: 9
Name: DIMM_P1_E1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 10
Name: DIMM_P1_E2
Capacity: 16384 MB
Speed: 3200
MemoryType: DDR4
MemoryTypeDetail: Synchronous Registered (Buffered)
BankLocator: NODE 0 CHANNEL 4 DIMM 1
Manufacturer: 0xAD00
SerialNumber: E057CC96
AssetTag: Not Specified
PartNumber: HMA82GR7DJR4N-XN
Visibility: Yes
Operability: Operable
DataWidth: 64 bits
id: 11
Name: DIMM_P1_F1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 12
Name: DIMM_P1_F2
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 13
Name: DIMM_P1_G1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 14
Name: DIMM_P1_G2
Capacity: 16384 MB
Speed: 3200
MemoryType: DDR4
MemoryTypeDetail: Synchronous Registered (Buffered)
BankLocator: NODE 0 CHANNEL 6 DIMM 1
Manufacturer: 0xAD00
SerialNumber: E057CCE6
AssetTag: Not Specified
PartNumber: HMA82GR7DJR4N-XN
Visibility: Yes
Operability: Operable
DataWidth: 64 bits
id: 15
Name: DIMM_P1_H1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 16
Name: DIMM_P1_H2
Capacity: 16384 MB
Speed: 3200
MemoryType: DDR4
MemoryTypeDetail: Synchronous Registered (Buffered)
BankLocator: NODE 0 CHANNEL 7 DIMM 1
Manufacturer: 0xAD00
SerialNumber: E057CCAE
AssetTag: Not Specified
PartNumber: HMA82GR7DJR4N-XN
Visibility: Yes
Operability: Operable
DataWidth: 64 bits
id: 17
Name: DIMM_P2_A1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 18
Name: DIMM_P2_A2
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 19
Name: DIMM_P2_B1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 20
Name: DIMM_P2_B2
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 21
Name: DIMM_P2_C1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 22
Name: DIMM_P2_C2
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 23
Name: DIMM_P2_D1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 24
Name: DIMM_P2_D2
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 25
Name: DIMM_P2_E1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 26
Name: DIMM_P2_E2
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 27
Name: DIMM_P2_F1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 28
Name: DIMM_P2_F2
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 29
Name: DIMM_P2_G1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 30
Name: DIMM_P2_G2
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 31
Name: DIMM_P2_H1
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
id: 32
Name: DIMM_P2_H2
Capacity: Not Installed
Speed: NA
MemoryType: NA
MemoryTypeDetail: NA
BankLocator: NA
Manufacturer: NA
SerialNumber: NA
AssetTag: NA
PartNumber: NA
Visibility: NA
Operability: NA
DataWidth: NA
...
HDD
LocalHardDiskList:
Disk: 5
Controller: MRAID
Description: 480GB 2.5in Enterprise performance 6G SATA SSD (3X endurance)
PID: UCS-SD480GM3X-EP
Vendor: ATA
Model: Micron_5300_MTFDDAK480TDT
SerialNumber: 22453E681638
powMin: 6
powMax: 6
Disk: 6
Controller: MRAID
Description: 960GB 2.5in Enterprise performance 6G SATA SSD (3X endurance)
PID: UCS-SD960G63X-EP
Vendor: ATA
Model: INTEL SSDSC2KG960GZK
SerialNumber: BTYJ244601LM960BGN
powMin: 0
powMax: 0
Disk: 253
Controller: MSTOR-RAID
Description: 240GB SATA M.2
PID: UCS-M2-240GB
Vendor: ATA
Model: Micron_5300_MTFDDAV240TDS
SerialNumber: MSY26171HXD
powMin: 6
powMax: 6
...
PCI
Slot: 1
PID: UCSC-P-I8D25GF
VendorID: 0x8086
DeviceID: 0x159b
SubVendorID: 0x1137
SubDeviceID: 0x02be
OptionROMLoaded: 0
ProductName: Cisco - Intel E810XXVDA2 2x25/10 GbE SFP PCIe NIC
fwVersion: 0x8000AA76-1.826.0
Slot: MRAID
PID: UCSC-RAID-M6T
VendorID: 0x1000
DeviceID: 0x10e2
SubVendorID: 0x1137
SubDeviceID: 0x02a4
OptionROMLoaded: 0
ProductName: Cisco 12G SAS RAID Controller with 4GB FBWC (16 Drives)
fwVersion: 52.20.0-4523
Slot: MLOM
PID: UCSC-O-ID10GC
VendorID: 0x8086
DeviceID: 0x15ff
SubVendorID: 0x1137
SubDeviceID: 0x02d9
OptionROMLoaded: 0
ProductName: Cisco(R) X710T2LG 2x10 GbE RJ45 OCP 3.0 NIC
fwVersion: 0x8000B906-1.826.0
Slot: MSTOR-RAID
PID: UCS-M2-HWRAID
VendorID: 0x1b4b
DeviceID: 0x9230
SubVendorID: 0x1137
SubDeviceID: 0x0251
OptionROMLoaded: 0
ProductName: Cisco Boot optimized M.2 Raid controller
fwVersion: 2.3.17.1014
...
Power Supplies
deviceID: PSU1
Status: Present
Status2: equipped
InputWatt: 70
Power: on
OutputMaxWatt: N/A
OutputWatt: 54
fwVersion: 10252046
Model: 700-014550-0000
MfgRev: CT
ProductID: UCSC-PSU1-1050W
deviceID: PSU2
Status: Present
Status2: equipped
InputWatt: 66
Power: on
OutputMaxWatt: N/A
OutputWatt: 52
fwVersion: 10252046
Model: 700-014550-0000
MfgRev: CT
ProductID: UCSC-PSU1-1050W
...
Fan status
sensorStatus: Unavailable
name: MOD1_FAN1_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
sensorStatus: Unavailable
name: MOD1_FAN2_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
sensorStatus: Unavailable
name: MOD2_FAN1_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
sensorStatus: Unavailable
name: MOD2_FAN2_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
sensorStatus: Unavailable
name: MOD3_FAN1_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
sensorStatus: Unavailable
name: MOD3_FAN2_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
sensorStatus: Unavailable
name: MOD4_FAN1_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
sensorStatus: Unavailable
name: MOD4_FAN2_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
sensorStatus: Unavailable
name: MOD5_FAN1_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
sensorStatus: Unavailable
name: MOD5_FAN2_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
sensorStatus: Unavailable
name: MOD6_FAN1_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
sensorStatus: Unavailable
name: MOD6_FAN2_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
sensorStatus: Unavailable
name: MOD7_FAN1_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
sensorStatus: Unavailable
name: MOD7_FAN2_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
sensorStatus: Unavailable
name: MOD8_FAN1_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
sensorStatus: Unavailable
name: MOD8_FAN2_SPEED
reading: N/A
units: RPM
minWarning: N/A
maxWarning: N/A
minFailure: N/A
maxFailure: N/A
minNR: N/A
maxNR: N/A
...
tpm:
tpmPresence: equipped
enabledStatus: enabled
tpmFirmareVersion: 7.85
tpmRevision: 1
model: UCSX-TPM2-002B-C
vendor: Cisco Systems Inc
serial: FCH272870A6
version: 2.0
activeStatus: activated
ownership: owned
txtPresent: Overall TXT Disabled
txtIntelVTIssue: NA
txtIntelVTdIssue: NA
txtHWIssue: NA
txtBootIssue: NA
...
AdapterDataList:
Slot: MLOM
PID: UCSC-O-ID10GC
ProductName: Cisco(R) X710T2LG 2x10 GbE RJ45 OCP 3.0 NIC
NoOfInterfaces: 2
Slot: 1
PID: UCSC-P-I8D25GF
ProductName: Cisco - Intel E810XXVDA2 2x25/10 GbE SFP PCIe NIC
NoOfInterfaces: 2
...
Battery Status
BBUList:
bbu:
controller: MRAID
group: status
controller-type: RAID
raid-support: yes
battery-type: TMM-C SuperCap
is-capacitor: true
bbu-health: Good
bbu-status: Optimal
battery-present: true
temperature: 23 degrees C
temperature-high: false
retention-time: N/A
absolute-state-of-charge: N/A
capacitance: 100 %
charging-state: N/A
manufacturer: LSI
serial-number: 46276
date: 2023-04-27
design-voltage: 5.059 V
voltage: 5.076 V
current: 0.000 A
learn-mode: Auto
learn-cycle-status: Successful
module-version: 180-4GB
learn-cycle-requested: false
next-learn-cycle: 2024-04-25 16:20
design-capacity: 99 Joules
absolute-state-of-charge: N/A
relative-state-of-charge: N/A
full-capacity: N/A
remaining-capacity: N/A
pack-energy: 66 Joules
completed-charge-cycles: N/A
BBU-temperature: 23 degrees C
BBU-battery-present: true
TMM-C-optimal: true
voltage-low: false
learn-cycle-active: false
remaining-capacity-low: false
no-space: false
premium-feature-reqd: false
microcode-upd-reqd: false
charge-active: false
discharge-active: false
learn-cycle-failed: false
learn-cycle-timeout: false
BBU-predictive-failure: false
BBU-replacement-required: false
BBU-fault: false
BBU-degraded: false
deviceName: CVPM05
transparentLearns: true
BBU-capacitance: 100 %
remaining-pool-space: 0 %
TMM-PCB-Version-Number: 0x
TMM-Serial-Number: 0x0000
TMM-Manufacturing-Date: N/A
TMM-PCB-Assembly-Number:
TMM-Battery-Version-Number: 0x
relearn-status: Unknown
relearn-start-timestamp: 0
relearn-end-timestamp: 0
relearn-percent-complete: N/A
...
Adapter List
controller: MRAID
controller-type: RAID
raid-support: yes
protocol: SAS
typeWithSlotId: SAS-MRAID
type-with-slotId: SAS-MRAID
next-exec-time: 2024-03-30 03:40
exec-freq: 7 days
next-exec-time: N/A
exec-freq: N/A
pci-slot: MRAID
managed-id: 1
storage-status: initialized
controller-status: Optimal
controller-health: Good
composite-health: Good
overall-health: Good
battery-status: Optimal
controller-temperature-sensor-present: false
ROC-temperature-sensor-present: true
drive-temperature-supported: true
running-on-hx: false
controller-temperature: 255
roc-temperature: 42
roc-temperature-w-units: 42 degrees C
tty-log-status: Not Downloaded
lock-key-assigned: 0
ctlr-secured-mgmt-type: none
cache-is-pinned: 0
patrol-read-operation-status: Unknown
patrol_read_percent_complete: 0
patrol_read_start_timestamp: 0
patrol_read_end_timestamp: 0
has-foreign-config: false
foreign-config-pd-count: 0
has-pinned-cache: false
lost-all-config: false
default-stripsize: 7
default-stripe-size: 64 KB
default-writePolicy: 0
default-readPolicy: 0
default-ioPolicy: 0
writePolicy-choices: 0,1,2
vendor: LSI Logic
product-name: Cisco 12G SAS RAID Controller with 4GB FBWC (16 Drives)
product-pid: UCSC-RAID-M6T
serial-number: SKD1610496
firmware-package-build: 52.20.0-4523
nvram-size: 128 KB
memory-size: 4096 MB
flash-size: 16 MB
cache-memory-size: 3142 MB
bbu-status: Optimal
min-strip-size: 7
max-strip-size: 11
supported-strip-sizes: 64KB, 1024KB
ncq-status: enabled
auto-cfg-option: unconfigured-good
raid-transitions: |0,0|0,1|0,5|0,6|1,0|1,1|1,5|1,6|5,0|5,1|5,5|5,6|6,0|6,1|6,5|6,6|
raid-min-pds: |0,1|1,2|5,3|6,4|
supported-ctlr-ops: 00000e0073fffffe
supported-phys-ops: 00000ff2effffffe
supported-virt-ops: 000000061e7ffffe
supported-bbu-ops: 0008
valid-ctlr-attrs: 0000000000003ffe
supports-cached-io: false
supports-add-config: false
supports-clear-config: true
supports-disallow-force-clear-config: false
supports-make-epd: true
supports-trimode: false
boot-drive: 239
boot-drive-is-PD: false
ctlr-treat-R1E-as-R10: false
ctlr-bios-mode: Headless Mode
ctlr-coercion-mode: 1GB
ctlr-flush-time-in-seconds: 4
ctlr-allowed-device-types: SAS/SATA Mix
ctlr-SAS-SATA-mix-in-enclosure-allowed: true
ctlr-SAS-SATA-mix-in-VD-allowed: true
ctlr-SAS-SATA-SSD-mix-in-VD-allowed: true
ctlr-SSD-HDD-mix-in-VD-allowed: false
ctlr-disable-ctlr-R-bios: false
ctlr-enable-web-bios: false
ctlr-expose-enclosure-devices: true
ctlr-maintain-PD-fail-history: false
ctlr-max-lds-per-array: 64
ctlr-allow-uncertified-HDDs: Allow
ctlr-online-controller-reset-enabled: true
ctlr-disable-cache-bypass: false
ctlr-JBOD-mode-enabled: false
ctlr-tty-log-in-flash-enabled: false
ctlr-auto-enhanced-import-at-boot-enabled: true
ctlr-use-drive-write-cache-for-rebuild-enabled: false
ctlr-SSD-write-cache-change-blocked: true
ctlr-HII-disabled: false
ctlr-performance-tuner-mode: Best IOPS
ctlr-512e-drive-support-enabled: true
ctlr-max-VDs: 0
ctlr-max-devices-exposed-to-legacy-BIOS: 16
ctlr-1MB-IO-support-enabled: true
ctlr-iMR-large-queue-depth-support-enabled: false
ctlr-transport-ready-enabled: false
ctlr-supports-more-than-64VDs: true
controller: MSTOR-RAID
controller-type: M2HWRAID
raid-support: yes
protocol: SATA
typeWithSlotId: SATA-MSTOR-RAID
type-with-slotId: SATA-MSTOR-RAID
next-exec-time: N/A
exec-freq: N/A
pci-slot: MSTOR-RAID
managed-id: 2
storage-status: initialized
controller-status: Optimal
controller-health: Good
composite-health: Good
overall-health: Good
battery-status: BBU Not Supported
controller-temperature-sensor-present: false
ROC-temperature-sensor-present: false
drive-temperature-supported: false
running-on-hx: false
controller-temperature: 0
roc-temperature: Not Supported
roc-temperature-w-units: Not Supported degrees C
tty-log-status: Not Downloaded
lock-key-assigned: 0
ctlr-secured-mgmt-type: none
cache-is-pinned: 0
patrol-read-operation-status: Unknown
patrol_read_percent_complete: 0
patrol_read_start_timestamp: 0
patrol_read_end_timestamp: 0
has-foreign-config: false
foreign-config-pd-count: 0
has-pinned-cache: false
lost-all-config: false
default-stripsize: 7
default-stripe-size: 64 KB
default-writePolicy: 0
default-readPolicy: 0
default-ioPolicy: 0
writePolicy-choices: 0,1,2
vendor: Marvell
product-name: Cisco Boot optimized M.2 Raid controller
product-pid: UCS-M2-HWRAID
serial-number: FCH27277A6Y
product-serial-no: FCH27277A6Y
firmware-package-build: 2.3.17.1014
nvram-size: 0 KB
memory-size: 0 MB
flash-size: 2 MB
cache-memory-size: 0 MB
bbu-status: BBU Not Supported
min-strip-size: 6
max-strip-size: 7
supported-strip-sizes: 32KB, 64KB
ncq-status: enabled
raid-transitions: |0,0|0,1|1,0|1,1|
raid-min-pds: |0,1|1,2|
supported-ctlr-ops: 000001e0000000e0
supported-phys-ops: 0000001204000000
supported-virt-ops: 0000000400001014
supported-bbu-ops: 0001
valid-ctlr-attrs: 0000000000000001
supports-add-config: false
supports-clear-config: false
supports-disallow-force-clear-config: false
supports-make-epd: false
supports-trimode: false
boot-drive: 0
boot-drive-is-PD: false
...
FRU Details
BuiltinFRUDevice(ID0)
Chassis Type : Rack Mount Chassis
Chassis Part Number : 74-125841-01
Chassis Serial : WZP272700PZ
Chassis Extra : Cisco Systems Inc
Board Mfg : Cisco Systems Inc
Board Product : UCSC-C225-M6S
Board Serial : WZP2726Z015
Board Part Number : 74-125843-01
Board Extra : C04V01
Board Extra : 0000000000
Product Manufacturer : Cisco Systems Inc
Product Name : APIC-SERVER-M4
Product Part Number : 74-125841-01
Product Version : A0
Product Serial : WZP272700PZ
Product Asset Tag : Unknown
Product Extra : F0V01
FRU_FP(ID1)
Board Mfg : Cisco Systems Inc
Board Product : UCSC-FPNL-C225M6S
Board Serial : 325003D1J0A
Board Part Number : FPC225M6
Board Extra : A04V01
Board Extra : 0000000000
FRU_MB(ID2)
Board Mfg : Cisco Systems Inc
Board Product : UCSC-C225-M6S
Board Serial : WZP2726Z015
Board Part Number : 74-125843-01
Board Extra : C04V01
Board Extra : 0000000000
Product Manufacturer : Cisco Systems Inc
Product Name : APIC-SERVER-M4
Product Part Number : 74-125841-01
Product Version : A0
Product Serial : WZP272700PZ
Product Extra : F0V01
FRU_TPM(ID3)
Board Mfg : Cisco Systems Inc
Board Product : UCSX-TPM2-002B-C
Board Serial : FCH272870A6
Board Part Number : 73-20115-01
Board Extra : A03V01
Board Extra : 0000000000
FRU_PSU1(ID4)
Board Mfg : Cisco Systems Inc
Board Product : UCSC-PSU1-1050W
Board Serial : APS271800Q6
Board Part Number : 341-0638-03
Board Extra : A0V03
Board Extra : 0000000000
Product Manufacturer : Cisco Systems Inc
Product Name : UCSC-PSU1-1050W
Product Part Number : 341-0638-03
Product Version : A
Product Serial : APS271800Q6
Product Extra : A0V03
FRU_PSU2(ID5)
Board Mfg : Cisco Systems Inc
Board Product : UCSC-PSU1-1050W
Board Serial : APS271800P2
Board Part Number : 341-0638-03
Board Extra : A0V03
Board Extra : 0000000000
Product Manufacturer : Cisco Systems Inc
Product Name : UCSC-PSU1-1050W
Product Part Number : 341-0638-03
Product Version : A
Product Serial : APS271800P2
Product Extra : A0V03
FRU_VIC_SLOT1(ID6)
Device not present (Requested sensor, data, or record not found)
FRU_VIC_SLOT3(ID7)
Device not present (Requested sensor, data, or record not found)
FRU_MLOM(ID8)
Device not present (Requested sensor, data, or record not found)
FRU_HD_BP(ID9)
Board Mfg : Cisco Systems Inc
Board Product : UCSC-HDBP-C225M6S
Board Serial : 32300574J0A
Board Part Number : C225SFFBP
Board Extra : A04V01
Board Extra : 0000000000
FRU_MINI_STORAGE(ID10)
Board Mfg : Cisco Systems Inc
Board Product : UCS-M2-HWRAID
Board Serial : FCH27277A6Y
Board Part Number : 73-19532-07
Board Extra : A05V02
Board Extra : 0000000000
apic2-cimc /chassis #
apic2-cimc /chassis #
0xD2A6762E
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-03-2024 08:42 AM
Pro-tip - Next time drop the output into a txt file and attach that, so it doesn't blow out the thread
So your adapter is the Intel 10/25G SFP adapter, so you can ignore the HUU warning and proceed. Let the Host Update Utility update everything it can.
UCSC-P-I8D25GFRobert
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
04-03-2024 08:55 AM
@Robert Burns ah ok yes I can attach a txt file next time. And OK great! Thanks for looking!
0xD2A6762E
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-27-2024 11:49 PM
Hi, Robert, I am facing similar issue as the new M4-APIC, Admin is up, interface is up, operational state is up, but still showing switching state is disabled. I have tried to disable the LLDP in the UCS but no luck. See the inventory TX file. Putting it as a standby APIC to replace the M2 is tough in getting the switching state enabled.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-30-2024 12:39 AM
@Robert Burns , any update please
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-30-2024 06:32 AM - edited 09-30-2024 06:34 AM
@jafehi000 What is your symptom? - is the new controller not seeing LLDP to/from the switch? If that Intel 10Ge NIC came shipped with the controller there shouldn't be any configuration changes needed for it to discover. Check if you see LLDP on both the APIC & Switch side:
From APIC:
ethtool -i eth2-1 (Your port IDs may vary slightly)
ethtool -i eth2-2
From Leaf where APIC is connected:
show lldp neighbor
Regards,
Robert
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-02-2024 01:35 AM
@Robert Burns , see output below
apic24# ^[[200~ethtool -i eth2-1
zsh: bad pattern: ^[[200~ethtool
apic24# ethtool -i eth2-1
driver: i40e
version: 5.15.126atom-1
firmware-version: 8.50 0x8000cc10 0.386.96
expansion-rom-version:
bus-info: 0000:46:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
apic24# ethtool -i eth2-2
driver: i40e
version: 5.15.126atom-1
firmware-version: 8.50 0x8000cc10 0.386.96
expansion-rom-version:
bus-info: 0000:46:00.1
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
apic24#
show lldp neigboor no output. I just erased the standby apic from the controller and unable to get it working.
My plan is to replace the APIC M4 with M2 and after downgrading the M4 to 5.31d same with the M2, no luck with switching disabled. The M4 has RJ45 embedded card which requires SFP-10-TX, link profile changed for SFP 10G-TX on port 1/37 leaf switch---93180YC-EX but still no luck
Learn, share, save
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Customers Also Viewed These Support Documents
