07-10-2013 11:51 AM
I had a simple scenario: 2 servers farms (each with two rservers) one for HTTP and another for FTP. Two VIPs
Everything works fine, but when I try to access from one Rserver from the HTTP to the FTP-VIP nothing happend
How can I resolve the traffic between two RSERVER via the VIP?
Solved! Go to Solution.
07-10-2013 07:49 PM
Hi
You need to add some more detail of your toplogy. but what i assuming is that all four servers [HTTP and FTP] are in same subnet, thats why when HTTP rserver hit FTP VIP reply from FTP will hit directly. If this is the case, you have to configured NAT on this server side VLAN interface.
07-10-2013 07:49 PM
Hi
You need to add some more detail of your toplogy. but what i assuming is that all four servers [HTTP and FTP] are in same subnet, thats why when HTTP rserver hit FTP VIP reply from FTP will hit directly. If this is the case, you have to configured NAT on this server side VLAN interface.
07-12-2013 03:53 AM
Yes. That was the issue.
I solve it by applying the concepts explained in
http://2and2is5.wordpress.com/2010/10/04/when-to-use-source-nat-on-the-cisco-ace/
THANKS Alot!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: