Application Networking

Hi everybodyI need some help, my customer using WAAS system to optimization. So, they need network dashboard summary everyday. Then, i don't know how to create or schedule on CM-Manager to do the report. Please give me the advice to create the report...

I am having problems with the SMTP/ESMTP connection to MS Exchange 2010 server when going via the ACE VIP. I have also tested with a serverfarm containing a single entry (1 exchange box configured) and still get the same problem. Not sure if there ar...

Hi all,I have an issue with a customer that wants to update a server behind the ACE. The problem is that when the application wants to update the server it does it with the name.Doing some research I found that you can rewrite the record DNS based on...

Hi, Need some advice from you guys. Currently, we have CSS11500 LB and we are going to migrate it to an ACE module. We will use CSS-ACE converter tools for new ACE config. Can the configuration be applied directly to ACE module? We have vlan 3 inside...

I have done this in the past but I cannot find it anywhere......how do you display the uptime of a CSM module in a 6500? The chassis has an uptime of over 2 years, but I believe the CSM module was power cycled at some point within that 2 years and I ...

Hi, I'm seeing the following error on one of our real server. Is there a way to find out who is spamming?10.x.x.x(VIP) - - "POST /slmruntime/service HTTP/1.0" 404 1214 Thanks,Andrew

Hi Guys,Does nobody know if this software : c6ace-t1k9-mz.A4_2_3.bin is compatible with the ACE20 module ?ThanksSaleem.

If I have the below settings:Site model: regional hub / data centerNumber of WAE: 4 (e.g. 7541)WCCP server: Catalyst 6500 / 7600WCCP redirect ACL entries: range from 4000 to 5000To follow the Best Practice for WCCP integration with Catalyst 6500, I w...

Hi Team,In our data centre we are using 4 WAAS.......WAAS001WAAS002WAAS003WAAS004In WAAS002 is showing in interface line protocol down.Which is connected with WAN Switch.When i checked other WAAS's it's configured below "Mode: autoselect, full-duplex...

Hello.First, I apologize for my English. Too bad!I have a 6509 with a service plate CSM-S (WS-X6066-SLB-S-K9) with software version 2.2 (3).I'm trying to create a ssl-proxy using a trustpoint with a certificate signed by a OpenCA.I  do the installati...

Hello All,Can someone advise me as to how to zero out the statistics and counters for vip, server farm and real servers?Adil

Dear Gurus,We have a pair of CSS 11503 installed in our DC. Stickiness is configured for one of the application since long back and was working pretty fine till last couple of months. Since last two months, we observed that CSS is not distributing se...