Application Networking

Probe Interval: 5Pass Detect (Seconds): 60 Fail Detect: 3Please can someone explain the above settings that are configured for a health probe?  am I correct in thinking the probe is sent every 5 seconds, and must fail 3 times in order to failover?  D...

Hi,Any date for the 4.5.1 ?We need the Citrix AO for an new project.Regards Jan Rockstedt

Hello,We are setting our new sharepoint environment up on our new ACE appliance.  We have setup sticky sessions and traffic seems to be flowing properly but we are running into a problem when we take one of the nodes out of service.  Traffic doesn't ...

We currently have an ACE 4710 device that has a VIP setup for a server farm for our customers. The protocol one must use to access the site is HTTPS. Is there any way to add the ability for HTTP without creating another VIP? If not, can I just create...

Hi,Should it be possible to perform interface SNAT (dynamic or static) on interface ingress traffic heading to the IP address of the interface?i.e. something along lines of: -!class-map CLASS_MGMT_NATmatch destination-address 10.1.1.1 255.255.255.255...

HI all,We have some wae-512, with sw-release 4.1.7-11. On one of them we notice the following errors2012 Apr 30 08:57:24 xxxxx-1310663e009 Nodemgr: %WAAS-NODEMGR-5-330027: Process with pid 5014 exits2012 Apr 30 08:57:24 xxxxx-1310663e009 Nodemgr: %WA...

I encounter the issue to bring up the WAE-612-K9, and stay on the Raid controller screen with booting in loop. On the Raid Controller screen, it displays the below message and seems detecting the Hard drive. Afte waiting around a few minutes, it will...

Hi,I've got logging turned up to 5 at present on some ACE 4710's and the logs are filled with messages: -   Error Message %ACE-4-400000: IDS:1000 IP Option Bad Option List from a.b.c.dWhich according to the ACE Sys Msgs Guide relates to: -  The ACE d...

ACE service module providing loadbalacing to four TMG 2010 boxes. All works well when the Internet is availble. Problem comes when there is an Internet outage for more that 5 minutes, the TMG boxes simple lockup and cannot service any kind of connect...

I'm using WAVE-574-K9 with OS version 4.1.5f and faced "CMS status offline" a few weeks ago.I recovered to online by "no cms enable" and "cms enable" commands.I also investigated below.If my investigation result is correct, I'd like to know root caus...

Hello all,We have a pair of ACE 4710 devices in front of a TMG 2010 array (3 members) and are having some issues.  We have a nat pool on the ACE and need to be able to use integrated authentication in TMG since we are filtering URLs based on user ID....