Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have enabled insert-http x-forward header-value "%is" on my ACE but the HTTP servers are only showing the ACE ip address and not the source address. do they have to enable something on the Logfile to display the source address Thanks
I need to update the cipher on my ssl parameter map and I need to know once I make the change on the parameter map does that change take effect when I hit enter or do I need to do something else to activate the change.I'm going to change my cipher li...
Hi,Is it possible to upgrade ACE 4710 from A3 to A4? What does this actualy means by A3, A4 & A5.I want to upgrade ACE from A3 to A4 becase I want to enable switch-mode on ACE. Current S/W version is A3 2.0 which is not supporting this command. Whi...
I am currently on version 4.2.3b of WAAS software and would like to upgrade to the current 4.4.3c. Can I upgrade directly to the latest or do I need to step up to a particular version before proceeding to the latest?Any help with this would be great...
We have just changed some infrastructure which required us to move an existing NM-WAE-502 from a 2811 router to a new 2951. This NM has performed flawlessly in the past but ever since it was moved to the 2951 it routinely "hangs". The syslog.txt file...
Hi,Does anyone know if UDP support is on the roadmap of the newer WAAS gear that was recently released? What is the time frame? I'm looking at WAAS and Silverpeak as potential solutions for WAN Optimization.If UDP support is on the roadmap for WAAS...
HiIs it possible to create a report that shows how much traffic that is unoptimized (passthrough) and how much of that traffic is for example encrypted mapi?BRCJ
Hello,If I'm going to use the 3945 WAAS- UCS/k9 bundle on a point to point link is it necessary to have a separate central manager or can the modules be managed by the command line? I will never have more WAAS implementation other than this point to...
Hi guys, I have a bit none standard task, I need to use only one VIP but depends on the customer source address I have to forward traffic to two different serverfarms.For instance if request is going from the network 192.168.0.0/16 it should be f...
hello,We are doing Load balancing of MS ISA servers SSL ActiveSynch and from time to time they go down for reasons not known yet.We configured a TCP/443 probe which does not fail when these ISA server go down and consequentially we have FAILED connec...
deploying an application using GSS and ACE.each site will have 2 ACEs in Active Standby mode ,and GSS at each site to do the global loadbalancing .Wondering ,on all ACEs do I need to have same certs and keys .As I will create CSR parameters and Key...
Hi Cisco Support,I have question related to Cisco ACE behavior in term to taking a decision based on source address I currently have two servers sits behind ACE part of one server farm, these servers are load balanced via one VIP on ACE module a...
Hello I use ACE in bridge-mode with mac-sticky enabled. Because of the redesign in the network topology I need to change the placement of the stp roots for client and server vlans with the minimal traffic disruption. I tested such topology in the...
