Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a server configuration where I have 1 top level Apache server that deals with SSL termination (and handles static content) and proxy passes dynamic content onto 2 Tomcat servers on 2 ports, one for http requests (9001) and one for the reque...
Folks,Is there any type of best practice (you ** must ** do like this) when you are going to implement the FWSM and the CSM modules on the same 6509 chassi ?PS: The CSM is not doing FW loadbalance, it is doing loadbalance to servers located in a DMZP...
Hi, I have a problem in the ACE 4710. In view of the connections of a web environment. When I view connections on Config> Operations> Real Servers, Conns column values appear very high connections (Example. 1606317769078).Already in Config> Operati...
Hello,We have two ACE modules configured for FT and bridge mode. Do we have to configure alias IP addresses on the bvi interfaces (I mean the bvi interfaces where client and server vlans are bridged)?.interface bvi 125 ip address 10.10.10.3 no shut...
Hi,I am trying to configure FT on ACE modules, with the following commandsft interface vlan 20 ip address 172.16.20.1 255.255.255.252 peer ip address 172.16.20.2 255.255.255.252 no shutdownft peer 1 heartbeat interval 300 heartbeat count 10 ft-...
Hi.I have a pair of ACE modules in an active/active HA configuration I currently have two contexts running on ACE1 and Admin context on ACE2.ACE1 reloaded due to the error: last boot reason: NP 1 Failed : NP Control Store Parity ErrorThis had happen...
We want to mask part of the path prefix to hide development content:For example: the site(s) are:https://server01.widgetco.local:50100/acme.com~iem~cssweb/login.xhtml&https://server02.widgetco.local:50100/acme.com~iem~cssweb/login.xhtmlHowever we don...
For WAAS Capacity Planning I'm trying to work out a way to gather WAAS appliance and module TFO connection statistics over time for each device. I'm looking to gather the number of TFO connections at regular intervals to allow us to get an accurate p...
Attempting to FTP a Wireshark capture file>381796-4216-R#copy disk ftp 166.38.50.249 C:\ Columbus_WAAS.pcap JimsTest1_000$Enter username for remote ftp server: 2ndlvlEnter password for remote ftp server: Initiating FTP upload...Sending: USER 2ndlvl3C...
Hi Everyone, Is possible to use simultaneously L2 and L3 Forwarding Method (WCCPv2) in the same WAE. I wanna to design a cluster with 2 WAE using the same service group in a DC and I wanna support both the L2 and L3 Forwarding Me...
Hello,I'm about to switch to wildcard certificates in a CSS 11501, however there are some doubts that I would like to clarify:- When generating the CSR can i use *.mycompany.com for CN ?- Should the CSR be generated only once or every time i need to ...
Hi Guys,Can someone please explain me when to use "redundant-index" command ? and how it is related to source-nat configuration.Also would like to know if its just for one arm mode. ThanksAjay
