Application Networking

I need use waas in different Datacenter, like a put on Attached diagram. What i need do to both waas, on different Datacenters, stay with same configuration and same data storage ?If the central Manager is down, all acceleration is lost? The traffic ...

Guys,I do not have access to ACE and not sure if we can encrypt locally stored passwords in ACE. I am using Radius Probe which requires to use username,password and shared secret key which are clearly shown as text in the running configs. Do we have ...

Hello:It is possible to make the GSS announce something like this:cisco.comcisco.com / tool Thank you very much

Hi,I have an HTTP rule configured with "arrowpoint-cookies" and "url /*". (11503 with 8.20.4.02)The performance are quite low and debugging the traffic at client side I see that the server intially propose a TCP window of 8760 but after the first GET...

Hi,My setup is :Source--- Router 1 ( ip 1.1.1.1) --ACE---router---cloud---customer---router--destination( ip 99.99.99.99). Traceroute from client to destination shows the following:traceroute 99.99.99.99traceroute to 99.99.99.99 (99.99.99.99), 30 hop...

Hello Friends, Need an urgent help to resolve my issue, i have two physical server running with 2 instances each serving same data so totally logical servers. Application is java based url:- www.10.12.x.x.com/x/x/x.jsp My client requirement is to loa...

Hello,is it possible use mixed mode for CSM? Mixed = routed and bridged mode using one CSM module. Of course, client vlan can be the same, but server side is different. I have 3 bridged configuration (the same client vlan, different server vlans) - i...

We are using a Ace module running version 3.0We do have a service which can now be reached by a url like https://www.xxx.com/yyy/ < notice the last /This is running via the Ace which terminates SSL and so on..So now our client wants an url like  http...

Hi all folks!I have two CSS 11500 series...In just a few months i will have ready a DRS (Disaster Recovery Site), where i will have 2 more servers to add to the environment.But this servers will be in a different subnet from that today i have for the...

Hi,I have a problem with ACE;We have multiple serverfarms configured in the ACE module based on the application and different VIPs related to it. We are running the ACE in bridging mode. Now the requirement is from one serverfarm real server wants co...

Can you please have a look at the below config : service test-1-6273   --à I understand this part  ip address 10.10.14.17   protocol tcp   port 6273   redundant-index 33   keepalive frequency 2   keepalive maxfailure 2   keepalive retryperiod 2   k...