Application Networking

hiI wonder if it is working like below at C2800.case.1!interface ATM1/0.40 point-to-point description to_WAN bandwidth 18000 ip address 192.1681.1 255.255.255.0 ip wccp 61 redirect out ip wccp 62 redirect in!!! other configuration is omitted.In cisco...

hi.I wodnder if the packet go through two wae as attached diagram, Is it ok?in case 1, the packet is go throuh just only 1 wae and to go to waas_dc and accelecation will be started.but in case 2, the packet which goes to datacenter 2 have to pass two...

Hi all,I have some new questions about file management in remote WAEs:1) If I make a PP and put the same file (with the same name, size, etc ... but from two diferent source directories) in the same task: the PP only copy the first file and optimize ...

hi.I wonder if the capacity of wae exceed, what happen on wae?I think, the wae seems to like bypass that traffic. so bypassed traffic didn't accelerator.if there is wae in the middle between two end-to end wae, the wae in middle accelerate above thos...

Hi Guys,I have a requirment to write a script to check the following;Check a number of tcp ports, a perform a HTTP GET then look for a string match in the returned page.Now, I am not really a coder but I can script the tcp port check and also the url...

How do you configure two VIPs to redirect http traffic from a client destined to two different https pages on different ports (443 and 483)For example;http://staffonline.com - VIP#1tohttps://rserver1.com:483/staff/signon.htmlhttps://rserver2.com:483/...

Where can I locate the key diffrences between the 2 trains of WAAS software ?I'm about ready to start a deployment and wish to select the best train going forward -

We currently have an F5 BigIP (2 redundant F5s actually) load balancing for our web sites. I am trying to install a Cisco XML Gateway.What is the best way to set this up?Thanks.Jason

Hi  , Please find the below probe configuration   of  probe and  the probe failed  out put of  t he server farm But the same probe is  operational for some  other serverfarm .  Also  we can telnet to the server  with  port number  80 . So please ...

Dear All,I had configured the ANM 3.0 with Email Notification, but while receving email from ANM. I am getting sender email as anm@ip_anm.localdomain.com . From where & how can I modified sender email id. I need it like i.e. ip_anm@localdomain.com.Re...

Hi,Often, the processing order of the different classes inside a policy map is important. However, when a new class is added, it is placed at the end of the policy map. More severely, if you reload an configuration with the checkpoint rollback comman...