Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Folks, I have 2 waas boxes accross the wan. Everything works great. When I write a new policy and apply to all device group , for some reason it does not effect on inidividual devices which are part of that group, I have to apply the policy ...
Hi,I am looking for a bandwidth optimization solution. Please suggest me what is the right solution. I need an independent answer since there are other solutions than cisco as well.Regards,Asim
Hi all,I have a remote site in Pune India and I am trying to set up a WAN simulator to simulate the WAN link with WAAS to Pune. Below is the topology and questions.Server farm <-- WAN simulator PC --> 3750 layer 3 switch <-- client PCsQuestions:1 - W...
can you suggest if this is possible and howwe have frnt end and back end web servers. frnt end web server to present the intial login page to the user. after the user types the login details frnt end web server send the detail of authentication to ba...
Hi,We're testing with http header insertion on our ACE-modules to log the client's ip-address.I have made a webpage which displays the added header.The insertion seems to work okay, but the header is only inserted in the first request within a one-mi...
Dear all,I am trying to find a way to bypass optimization for a specific L7 Class-Map on ACE 4710. My problem is that i am using one VIP and i am intercepting users based on L7 URL match statements and send them to the apropriate sticky-serverfarms (...
Hi,I am trying to configure a probe to login to a telnet server with uid = joe and passwd = bloggs.The server should then send a welcome message 'welcome' which I would like to use as successful response.Is this config correct to achieve this (runnin...
first of all, please check the tcp-idle time out tunning.parameter-map type connection TCP_Timer_24h set timeout inactivity 86400 class-map match-all NET1 2 match access-list net1 policy-map multi-match Outbound_TCP class NET1 connection advanc...
Hi, At this time we have a cluster with two WAEs 7341 ( 4 HDD with 300GB each) connected to a Cisco 7609 router, they are communicating using layer 2 for redirect and return packets between them, the WAEs are caching HTTP, DNS, HTTP and FTP-NATIVE,...
I am setting up the 4710 to do load balancing using routed modenow I have setup an interface address 172.16.7.86 on the client side vlan(vlan7), and the VIP of 172.16.7.85,I have an ACL allowing all, but I cannot ping the real ip address of 172.16.7...
Is it possible for a service, belonging to a content rule to reach that same content rule?For example:I have a service called serv1 with IP 192.168.44.10 listening in port 8080.Another service called serv2 with IP 192.168.40.11 listening in port 8080...
We're in the process of generating a cert and the Key Pair on the ACE. We have successfully generated the Key Pair in the form of the ubdkey.pem. However, generating the Cert Signing Request requires the public key. How do we "separate" the public ke...
Hi,Despite of probe-failure the failure counter is not incremented. Is there any correlation between the configured probe and the failure counter?(Custom script probe is used for this serverfarm)# sh serverfarm xxxxxSt serverfarm : xxxxxSt, type:...
I have an CE507 with software version 4.1.1 , I need to upgrade it to ACNS-5.5.11.2-K9 , but before I think it should be upgraded to 4.2.1 and then to 5.x the problem is I am unable to find 4.2.1 or later anywhere , I just have ACNS-5.5.11.2-K9 . I ...
