Application Networking

we deployed layer 2 CSS for load balance, and it just basic configuration. does the basic configuration can detect 1 real server down and auto switch to another server?If not, what configuration we need to make sure:if user request been redirect to s...

We recently installed a Cisco WAAS for a customer consisting of a core 612-4GB, 512-2GB for edge, and a 512 for CM duties. We configured the 612 to export specific files on a netapp NAS to remote users at the edge. The WAN connection between core and...

I have just started to upgrade my WAAS devices to 4.0.19, one of the WAAS devices gives the following errors every 5 minutes co-inciding with the CMS updatehemwad01 2008 Aug 21 08: java: %WAAS-CMS-4-700001: ce(DataFeedPoll): CmSecureStoreParseHelper:...

I have an ACE on an ASA DMZ. From my client on the inside, and with NATing on the DMZ interface where the ACE is, I could not hit the ACE (a.k.a wouldn't be served web pages). ACE service-policy doesn't show any hits or client byte counts. However, ...

Whats the equivalent of application ftp-control command in ACE configuration. I have a user whose passive ftp is not working. The firewall is allowing passive ports.

After failover to redundant (backup) BOX, the backup BOX becomes Master but output of “sh redundancy” shows Redundancy Protocol: Not Running and shows intermittent packet drops.

Hi,i have configured to load balancing the http traffic to 2 servers, servers have the ip address 10.10.50.100 and 10.10.50.101 resp and the vip is 10.10.46.10iam not able to access the http through the vip, can some one help on thisam i required to ...

I just started experiencing SMB/CIFS timeouts over one of my core clusters when copying any(and I stress ANY) files. The error you would receive indicates that the server connection was interrupted or the location no longer exists. I can RDP to the...

HelloRunning WAAS 4.0.19. I've stuck an issue where the CLI command on an edge WAE:transaction-logs export sftp-server 10.1.1.1 tst1wae01 password logs/raw...is accepted but when you then try and use the Transaction Logs page of that WAE in the Centr...

Hi,I am newbee to GSS. I would like to deploy the GSS in my datacenter.I would like to know the DNS configuration example for domain.ex:www.abc.comWhat records need to configured with detail script. beacause i dont have experience in DNS server confi...

Hi all,We have been attempting to troubleshoot the CSS11501 using the llama debug feature.Has any one got any documentation as to the meaning of the flow options and any idea why when we use the flow trace-ip command the debug output shows anything b...

I am currently running a CSM (bridge mode) with the following configuration: vlan 110 client ip address 192.168.223.131 255.255.255.192 gateway 192.168.223.129! vlan 223 server ip address 192.168.223.131 255.255.255.192! serverfarm HTTPSFARM nat ...

Hi,Our server guys are wanting to view real ip's of client requests on server logs, so we are turning off source nat and using redundant interfaces with fate sharing, I just need to run this by you guys on here. Please also see the attached basic to...