Application Networking

I have two CSS devices, one set up at HQ and the other in DR.Both are outside our Firewalls in one armed config mode.Normal operation has HQ interenet intact and Web requests go to HQ servers, if HQ servers are down, the HQ CSS directs to DR through ...

I am trying to configure a redirect on my 4506 device to restrict some data from being processed by the WAE located in my datacenter. Outside the redirect-list command, how do I prevent data from being processed by the WAE?The IOS I am running is boo...

Hi, Our network topology is as per the attachement “CSS Topology Diag.jpg”. The users behind the CORE network will access the application through the VIP address “192.168.10.171”. SSL card has been installed on the CSS's and the SSL gets term...

I have a layer 3 rule set up to round robin between three servers. after my development team based one of three servers with about 15,000 requests today directly, it has become unavailable to the round robin and listed as "down" but all signs on the ...

I worked the ace on last nightI configured two context, 128 and 130There are no problem in load-balancing server farmbut there are some issue in logging-serverI configured the logging buffer 6 to send the system message to syslog serverI didn't confi...

we have HTTP redirect and SSL termination configured at CSS11501.we are using server generated Cookie for session stickiness, one issue we found is that: within one HTTP1.1 request, there might be some objects missing (like some images), then the ses...

Hi, I'm trying to implement a WAAS topology with two WAE 512's and two WAN routers at the core and 2811 with a 512 module at the tail sites. The core routers are running mHSRP and each WAE uses a different HSRP virtual IP as their default GW. The pro...

Hi,I am trying to use our CSS like a reverse proxy to get web traffic back into our core network from the outside world, just for this one server. In a one-armed fashion, the CSS passes the packet through the firewall to be routed inside, but it drop...

Hi,where can I find detailed informations about this client-software (design, configuration)?Thanks.Volker

Do I need a live internet/DNS environment to test this switch? I have bridged vlan2 to e1. my VIP is set to X.X.X.47 and I have to services set to X.X.X.45 and .46. They both say active. The e1 port is up but my vlan2 is down. I am assuming that the ...

Hi Guys,would really appreciate some help with this.We are currently running the following configuration.CSS11503 x 2 with 2 WAE-612's acting as transparent Caches.The issue is, is that once we enable the CE's in the CSS sevices, content can be retri...

Hi,I need to modify the upstream-downstream service I'm using as a critical-service for my VR's.What will happen if I suspend it, in order to modify it ?First of all, will I be able to suspend such a service being used as a critical-service ?Second, ...