Application Networking

Hi,I have a lab setup with 612s, 4.0.9 image. No preposition. Two central servers, one 2000 server and one 2003 server. Client is win xp at branch site. Transfering the same file from both server. Looks like the optimization is working from the 2000 ...

I have an ASA in the edge of the network, and this ASA sends the web traffic to an Content Engine with WAE through WCCP.When I access somewebsites the reply is as quick as not having the WAE, but for some websites the dalay is about 5 times more than...

I have found out that BGP is configured to advertise the HQ subnet of 2.1.1.64 out of the DR site during a failover of the HQ Internet connectivity, or an entire site failover.Since this is the case, I do not need the DNS solution, but I will still n...

Is there any reason the following configuration would not work. I would like to create 2 vlans on a css and connect each to 2 interfaces on an ASA. Then connect 2 servers into the 2 vlans on the css. The 2 servers should not be able to talk to eachot...

Hello,I am currently working through a try and buy of the WAAS solution.I have a data center connected via a T1 to a remote site. I have included an image of the test design. All three appliances are WAE-512's. As noted in the visio, I am using wccp ...

WE have a BGP configuration that advertises the Main site Internet router subnet to the PE router. If the Main site looses Internet connectivity, the BGP configuration will advertise the Main site Internet subnet to the DR PE router.This allows the D...

Good afternoon, I think I know my answer but I'm hoping somebody has something up there sleave that can assist me.The Problem is this, I currently have a pair of 11506 without the SSL license hosting like 35 ssl sites utilizing layer 3 rules.The cert...

Hi,I'm currently in the process of configuring a CSS to terminate some web traffic to our site. One of the things I'm looking to implement is a way to redirect traffic to destinedfor http to https if it attempting to hit a certain URL, eghttp://abc12...

Hi, am configuring ACNS & getting a number of suspicious_url requests. I am only acessing a single server (on a private lan). Cannot find any documentation to explain this.

I'm moving from SCA2's to SSLM's(cat6500 Blade), We are using the config below and it works fine but I require to do keepalives to each of the ssl-proxy services.I've tried to config it the way it was done on the SCA config by using the same IP but c...

Hi everyone,I plan to upgrade CSS software from 07.30.1.06 to 07.50.3.03. The SSL module is installed in this CSS and CSS uses certificate from CA for user authentication.So I would like to know what the answer for the following two question are.Firs...

Hello,trying to setup OWA behind CSS with SSL termination.http-header static "FRONT-END-HTTPS: on" is in place.User can access folders and calendar, but can't see body of the messagesThe problem seems to be that user at some point tries to use http i...