Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Want to replace 48-port ethernet F2 I/O module to F3 module, using the same slots in the 7700.
I see that the port-groups are different between the modules.
Can't find any documentation for the type of replacement.
Anyone done this type of replacemen...
I try to upgrade a c8200 from 17.4 to 17.5 by using vManage - it fails. Here are some logs from the console of the router: %INSTALL-5-INSTALL_COMPLETED_INFO: R0/0: install_engine: Completed install add PACKAGE bootflash:c8000be-universalk9.17.05.01a....
Looking for some description for one particular LED on the front panel of ir1101. The LED-icon is showing a human + LED. Documentation:https://www.cisco.com/c/en/us/td/docs/routers/access/1101/b_IR1101HIG/b_IR1101HIG_chapter_01.html#con_1200520 says ...
Have problem with uplink port on remote switch going in udld err-disable when connected to 3850 running 16.3.3
Looks very similar to CSCvd33197
Denali: 3850 Uplink port goes down after reload due to udld err-Disable on remote end
But looks like the...
I try to install the ASR920-1G-12 license on ASR920-12SZ-IM to active 12x1G, but it says "not supported" during installations.
Anybody know if L-ASR920-1G-12 is for this ASR920 platform? I really suspect that is not the case.
Link and SFP+ is ok. If I disable udld on the the 3850 sfp port, the link is up. Still up when I try to enable udld again. I have not tried to boot the switch to see what happens.
Hi,This post is very interesting. And have some questions.My setup is:client - switch - waas (inline) - branch router - wan - router (wccp redirect, gre) - serverthe branch router is adjusting mss to match the lower mtu in wan.What I see from wiresha...
Vrf-lite on the CE, but you need to evaluate the linke between the PE - CE if you can do that (ex. if ethernet, can you use 802.1Q, or serial - use frame-relay PVCs.
