Application Networking

Hi everyone. I'm having a problem setting up a load balanced cluster of FTP servers behind a CSS 11506.I can FTP into the cluster fine. I am redirected to one of the machines in a round robin fashion and can log in. The problem arises on mac's where ...

Hi all.I want to configure a transparent wccp for traffic tcp between a Ce 7326 and a Cat6509.I configura on the router an access list with the traffic to be redirect and another with the list of CE.router(conf)# access-list 109 permit tcp 10.10.10.0...

I have configed transparent proxy with ACE and CE510+Bluecoat. I also enable client-ip spoofing. I use PBR for redirect request web page from client to ACE and I also use PBR for return traffic from any web servers to ACE(make complete flow for clien...

Hi All,I'm relatively new in CSS devices. In my new account, there are 2 CSS which is running a very OLD IOS version:MOM-CSS2# versionVersion: ap0500002 (5.00 Build 2)Flash (Locked): 5.00 Build 2Flash (Operational): 5.00 Build 2Type: PRIMARYLicensed ...

Hi there,I need a help, and I have this following situation:*My Service is web and its listen TCP ports - 443 Https and 80 http*The port 443 is only used to login and after its login all web requisitions are by port 80 www *We have 02 services runnin...

Hi Folks,If I configure CSS for a customer header field, will it allow me to configure advanced loadbalancing on this header field?TIAAlan

Hi,We have the following setup;Requests to www.oursite.com goes to the content rule LB_FD_87. Request to www.oursite.com/water/* goes to the more specific content rule FD/WATER_LB_87. Sometimes, for unexplicable reasons, requests for www.oursite.com/...

Hi there,Mobile GSM clients connect through WAPGW over CSS to real servers. We want to stick their connections based on msisdn field. As it seems this field is not recognized by CSS since "lookup fail" counter increases ant there is no match. We have...

Hello,i've read the Manual for SSL Termination.I did not find any Option, how i can control the Secure and the nonsecure Port. On CSS it was possible to do this in the ssl-server inside the ssl-proxy-list.How can i change that on the ACE?Sven

Does anyone have a good health check for SIP?

Hello,i'm actually testing ACE Module to exchange our CSS Systems.On our CSS we have set up some groups that do NAT into the same VIP as the Content Rule uses.So the Server are accessible by the same IP that they use for outbound connections.I've not...

Hi guys,What does the "=" mean in Cisco part numkber? It seems ther is no difference between the parts with a "=" and the parts without a "=", such as "GLC-SX-MM" and "GLC-SX-MM="Thanks,Justin

Good day, I'm hoping someone can assist. I have the Web Admins reqeusting that they want the users to be able to just put in there browser http://www.company.com and then automatically be transfered to http://www.company.com/site_a. Currently this is...

We have recently installed a configuration of Cisco CEs and one CDM (model 566) to support windows media streaming from our intranet IIS/Windows Media servers. We have configured routers in area locations to transparently re-route WMT requests to a l...