Hi,What are the slots and ports on a 4400 controller? Why when the LAG is enabled, you cannot create interfaces with a primary port other than 29? What does the "primary port" mean?AP Name Slots AP Model Ethernet MAC L...
Hi,Some documentations put the management interface on a 4400 controller into a regular tagged VLAN. But some documentations put it in an untagged Native VLAN, the tag=0. What is the difference? Which configuration is optimal?Thanks,Justin
Hi guys,What does the "=" mean in Cisco part numkber? It seems ther is no difference between the parts with a "=" and the parts without a "=", such as "GLC-SX-MM" and "GLC-SX-MM="Thanks,Justin
Hi,I have two Cisco 1242 APs with both -a and -g radio. Can I set up them as point to point bridges and bind the 54M -a and 54M -g links together to get a 108M link? How is the traffic pass through in these two links? load balance?Thanks,Justin
Hi,I have a Cisco 1841 router. There are two fixed FastEther interfaces and two slots.I am going to add two 4-port EtherSwitch HWIC cards into these slots. Can I get four router interfaces when I added these two cards into the router? That is two bui...
Hi Danilo,If I don't stack the two HWIC cards, can I get 4 L4 ports? That is 2 built-in L3 ports on the router, and 2 ports on the 2 HWIC cards (1 L3 port on each HWIC card). Totally, can I get 4 L3 ports?Thanks,Justin
