Application Networking

Hi Folks,I have checked the docs to see if the CSS will specifically use header fields in HTTP when it is configured with advanced-blanced wap-msisdn in the content config or the msisdn field in the header-field config. Or does it match with any head...

I'm deploying a CSM in bridge mode that will be used in conjunction with a FWSM that acts as the gateway for each server farm. From Cisco's CSM & FWSM design guide they state, "The most important point is that by specifying the incoming VLAN in the v...

Hi Giles,Have noticed a strange problem with HTTP to HTTPS redirects that i've setup for a customer.BACKGROUND- CSM is configured in routed mode- The backend server is WebCT Vista, hosted on Bea Weblogic 8.1 and is written in J2EE so it's all beans.-...

I'm having some issues with a newly deployed CSM SSLM. We are conducting performance testing and I amd seeing very slow response times. I have adjusted the "delayed-ack-timeout" to 50 from 200 seconds and turned "OFF" Nagle. This has seemed to help t...

What is the performance different between css11501s and css11503 with SSL acceleration card especially in the "RSA operations per second" and "concurrent connections"? Do you have any documentations for descripting the css11501s performance?

Hello,Can one modify the field Use-Agent: Mozilla/4.06 at the time of a requette Keepalive HTTP.Indeed, the statistics of the server application are errone because of keepalive Http of CSS Regards, Sebastien

Hi Giles,My current network is as follows CSS 1----? PIX 1 -----? LAYER 3 SWITCH ---? SERVER FARM 1 | | | | | |CSS 2---? PIX 2 ------? LAYER 3 SWITCH ----? SERVER FARM 2 Objective – Have CSS 1 load balance the server farm 1 and have CSS 2 load balanc...

Can I use ACE to redirection http to Proxy Server? If It is possible to implement, please give me some basic configuration. Since I couldn't make it work.

Hi all,Just a quickie, we have implemented the CSM's into our portal and have 16 web servers in our webfarms. In a previous platform we used Alteon's which gave us a good indication for connections to each webserver, which we could then take out of s...

For some reason we thought there was an issue with this but no one can remember why.We have a CSM in routed mode and would like to load balance between two servers in different subnets. Can this be done?For exampleVLAN 10 Clientip address 192.168.10....

This seems like a fairly easy question, but I don't know the answer. I have 2 servers behind a VIP and need all requests coming into that VIP to go to a single server. When that server dies, I would like the VIP to fail over to the other server and k...

[It was suggested that I re-post my question here]We have obtained Web hosting from a provider that uses the Cisco CSS 11501 as a load balancer. The configuration is two page/Web servers and one database server. Since their support has not been adequ...

I need to concatenate chained certificates in a SSL-module, my question is?Must I include the ---BEGIN CERTIFICATE--- and -----END CERTIFICATE----- text, or just the certificate characters?Thanks in advance for your advise...Erick Flamenco

Hi,I am trying to decipher how to bypass the content rules being processed to allow the traffic to go direct to the real (origin) server without going via a loadbalanced device. As I know the destination IP's it seems to me that I can use ACL's with ...