Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I want to configure this type of balance:Web servers that need to access the application server:Web1 10.231.1.9/26Web2 10.231.1.19/26Application servers (real servers):App1 10.231.1.8/26App2 10.231.1.18/26As you can see, they are on t...
Hi Everyone,I have a preposition job that's trying to copy a folder roughly 108GB in size (comprised of subfolders and files). I have the job running nightly and it always terminates after several hours copying about 27GB of data saying, "Prepositio...
We have a pair of ACE 30's in 6500 Service Chassis connected to Nexus 7000.The ACE's are running in router mode. One VIP (VLAN 100 - Client side) is set up for SSL termination, and the traffic is forwarded to a pair of Rservers (VLAN 200 - Server sid...
Hi,I get the following error when I try to add sticky config to a context.Error: sticky resource not availableI have added the following to the admin context but no joy:resource-class ********** limit-resource all minimum 0.00 maximum unlimited lim...
Hi, On all our routers, switches and firewalls we've configured syslog so we get logs when configuration changes occur.Is this possible on the ACE too ?regards, Sebastian
Software Release 4.4.5WAVE-294-K9Alert:cceAlarmHistModuleId= 1000 cceAlarmHistCategory= 3 cceAlarmHistInfo= Raise-Alarm: CIFS accelerator keepalive failure. cceAlarmHistTimeStamp= 3539553200I got the following alert. Does anyone know where I can ...
Wondering if anyone knows of a way to stop a WAAS software upgrade in progress?This morning I kicked off a device upgrade to multiple remote WAE/WAVE devices - and the cumulative impact of these FTP transfers over my WAN caused a bandwidth issue on m...
Hi ,I have configured my ACE Mod 30 with Admin and some basic settings for Web filtering contexts. After putting the delta configurations for syncing...Configuration mode is showing disabled @ standby ACE, which is correct and as expected.But even on...
Hi,i'm trying to configure some ip access-lists on a WAAS but it seems that it's not matching the traffic.interface InlineGroup 1/0 inline vlan all ip access-group test in exit ip access-list extended test deny icmp any any exitIm still able to ping ...
Hi,I try to configure ACE 4710 LB A5(2.1) LB to do following:1. client send a http request for login to WEB srv2. server response and send a cookie Set-Cookie with following pattern JSESSIONID=C333C37FCF083D210A639ABB8BB9DB21.S01 (33 random body 3 ch...
Hi,We are replacing WAAS devices WAVE - 7371 with WAVE - 7541. There are 6 WAAS devices at this location and we have already replaced one of existing 7371 with 7541. The 7541 are running OS 5.0.3 as we are running OS 4.4.7 on WAAS CM and WAAS devices...
Dear All,This is regarding Cisco ACE loadbalancing matching more than one header in L7 class map. I have a small setup with ACE 30 module in Cisco6500. I have got three webservers. Presently I have following configuration where I am mathing one url h...
Hi,how to suspend "circuit VLAN" in CSS? I'm migrating load balancings off from CSS based on VLAN so I need to suspend the "circuit vlanxxx" so that i don't have touch each load balancing whose servers belongs to this "circuit vlanxx"?
