Application Networking

Hi, folks!!We have two routers connected one interface of each to internet and another interface of each connected to a net where is CSS. (After CSS we have the servers.)If we set IP source route only in CSS, the return of packets for internet will b...

When I configure dns maps or dns policies on my CSMs (WS-X6066-SLB-APC, HW 1.7, SW 3.2(2)) they say"Map type DNS not supported by card, config accepted." and"Policy type DNS not supported by card, config accepted."What's the reason for that restricti...

hi, anyone know where to download the mib file for CSS?

Hi together,1. is there any possibility to clear an entry in the sticky table ?2. how could I find a sticky table entry, belong to a certain IP Addres or flow ?commands I know to find more details infos about the sticky table and the flows find below...

I have configured SSL on a 6513 and also configured a management vlan with IP and VTY telnet. I allowed the management vlan and the SSL vlan using ssl-proxy command. I am able to telnet into the SSL module from the 6513 but can not telnet to SSL from...

I have to configure CSM/SSL modules for 3 VIP and 10 servers. I will be using Verisign certificates. Should my certificate requests (CSR) be specific for SSL modules? What kind of certificates should I request for SSL modules. What will be the best w...

We are using a CSS11501.We want to implement sticky connections based on the JSessionID from the ORACLE application servers?How could this be done?Thank you in advance.

Can somebody please clear this up for me as I don't really understand the documentation.I am trying to Import a VeriSign certificate to my CSS.I Export the certificate from the Windows IIS server and it generates a .pfx file. I assume this includes t...

Hello,I've got two new CSS, but when I start them, no prompt appears at terminal-console.I checked my cable, my PC, all...Is it possible a battery problem?Thank you in advance

In the documentation (http://www.cisco.com/en/US/partner/products/hw/switches/ps708/products_installation_and_configuration_guide_chapter09186a00801c58a8.html) is noted, that when CSM redundancy is in use, the igmp snooping must be disabled globally....

Are there ways of setting maximum TCP Session lengths via the Content Switches. I have an issue with a Switch that receives a normal packet of data in and then seems to transpose this into a TCP Reset and delivers it to the destination and also then ...

Hello,I have a CSS performing load balancing between some servers on port 443 (SSL). Since some clients try to connect to the VIP using port 80 (hhtp), I’m trying to find a solution on the CSS to send a redirect to the client in order that this one c...

Hi All, Have any one running version 7.4 on the CSS 11506 in their environment. Any stability issue?Thankstd

What are the main differences between FAILED and PROBE_FAILED status on the CSM ?Are connections still going to a real server when it is in PROBE_FAILED status ? The probe itself seems to work (it detects the port not being open), but connections are...

Dear all,Iam trying to config a CE 590 with ACNS 4.2.1 to permit ftp through Internet Explorer (CE is configured with proxy mode).This is the config that was made in order to permit it:-----------------ftp object max-size 2000ftp proxy anonymous-pswd...